Aligning Adaptive family with Centre line at 90 degrees

[RMohareb]

@Monkeyman you need to predefin rotation parameter to the family in XY plane

Rotate Adaptive 3 Points Family arround X-Axis and Z-Axis

hi @Cagatay as you host ref. point into the adaptive point to rotat xy plane(about z) you need to add another refre. point to rotat in XZ plan. [image] to calculate the rotation angle use this node from “BrimMohareb_2023” [image] Three_point_adaptive.rfa (672 KB) and here is a example