Hi I am new to Revit and Dynamo Scripting, Currently in a project where the system is capable of creating pathways and hallways in a BIM model just from the start and end points from the user. See I am aware that is system is possible by using the PathOfTravel Tool available in Revit, But what am trying to achieve is a system where the path of travel lines are made of 90 degree lines only. Path Of Travel tool typically finds the best and the shortest route and doesn’t mind about the angles of the lines. So iterative system using python scripting where the program runs until it figures it if the path of travel lines that are present only contain straight lines only. I was able to receive some help in getting the vectors from the path of travel and was even able to make few of the lines straight but the issue would be that I would need to insert way points within the lines to make them straight. Inserting way points using the existing nodes are fairly simple but I need them to be present in a python script so I could make the system be iterative and provide with fairly correct result. The issue is that for the python script I was able to declare the necessary libraries from the revit api in the python script and apparently the insert way point function requires the waypoint location and index but declaring them in the script shows up with an error and saying that the arguments are incorrect. This is how I declared it: waypoint = PathOfTravel.InsertWaypoint(“chosen point”,“index”) I am awaiting for an response please help!!!

This worked for me in Revit 2023.1 using the CPython, IronPython2, and the as of yet unofficial IronPython3 engine. Think there was a miss in implementing the code from @c.poupin - likely skipped adding System to the clr causing the import to fail; either way that isn’t required if you update the paths in time with adding the waypoints. import clr # Import geometry conversion library clr.AddReference("RevitNodes") import Revit clr.ImportExtensions(Revit.GeometryConversion) # Import DocumentManager and TransactionManager clr.AddReference("RevitServices") import RevitServices from RevitServices.Persistence import DocumentManager from RevitServices.Transactions import TransactionManager # Import RevitAPI clr.AddReference("RevitAPI") from Autodesk.Revit.DB import XYZ from Autodesk.Revit.DB.Analysis import PathOfTravel #Get the active document doc = DocumentManager.Instance.CurrentDBDocument # Input and unwrapping paths= UnwrapElement(IN[0]) pnts = IN[1] # Start Transaction TransactionManager.Instance.EnsureInTransaction(doc) #NOTE: even if a transaction isn't required for modifyign the document, you want it to be here to prevent corruption, and ensure longevity of the code base (it's likely to be a requiement someday). for path, pnt in zip(paths,pnts): #for each path and point pair pnt = pnt.ToXyz() #convert the Dynamo point to a Revit XYZ. If you're builidng your points as native XYZ you can skip this, but you'll have to do the work somewhere else instead. path.InsertWaypoint(pnt,0) #insert the waypoint at index 0 - you likely want to be a bit smarter than this PathOfTravel.Update(path) #update the path of travel # End Transaction TransactionManager.Instance.TransactionTaskDone() OUT = paths

@abishek12354 , you can check this, maybe there are similarities [image] Path of travel, how to visualisize in python Developers Hello, i want to compare path of travels from view to view! project leaders are suspecting that the paths ar not identical, and i want to check this… my code tragigly shows nothing, only empty lists i want also a geometry of my path, how ? import clr clr.AddReference('RevitAPI') from Autodesk.Revit.DB import * from Autodesk.Revit.DB.Structure import * clr.AddReference('RevitAPIUI') from Autodesk.Revit.UI import * clr.AddReference('System') from System.Collections.Generic import List clr…

Is your chosen point a Revit XYZ object? If you are using the Dynamo geometry library you will have to convert it first. Best to share your code for review if not (or if you need help converting this specific data type).

The chosen point is a Autodesk Geometry Point and weirdly it started to work on its own but currently I am facing issues with the update function as it provides with an type error where the no methods matches the given argument Path.InsertWayPoint(Point.ByCoordinates(100,-100,0),0) status = Path.Update() The error is: [image]

Can you post some reproducible code? It’s quite a lot of work to build a Revit model to make a path and find a point to add, then build a your code with no more than a reference to your api call, and then finally start to debug.

@jacob.small Here is the python script: import sys import clr clr.AddReference('ProtoGeometry') from Autodesk.DesignScript.Geometry import * clr.AddReference('RevitAPI') from Autodesk.Revit.DB.Analysis import * # The inputs to this node will be stored as a list in the IN variables. # Place your code below this line travel = IN[0] counter = 1 for paths in travel: tx = (10000 * counter + 1000); temp = Point.ByCoordinates(tx, 1000, 0) paths.InsertWayPoint(temp, 0) status = paths.Update() counter = counter + 1 OUT = 0 The python script just requires a path of travel element, select a path of travel element and attach to the Input 0 of the python script. Make sure your path of travel element is in a list. Awaiting for your response!!!

I’m finishing a PowerPoint and some prep work for a meeting Monday. Soon as that’s done I’ll review this.

[image] abishek12354: status = paths.Update() Hi, Update() is a static method Instead of status = paths.Update() try import System from System.Collections.Generic import List, IList, Dictionary array_PathOfTravel = PathOfTravel.Update(path) [image]

@c.poupin it still provides with the same issue, but still thank you for your input

[image] abishek12354: the same issue with same error message ?

@c.poupin Yes it presents with the same issue

Help with PathOfTravel using RevitAPI

Developers

Draxl_Andreas April 2, 2023, 11:27am 2

@abishek12354 ,

you can check this, maybe there are similarities

Topic		Replies	Views
[Help Needed] - Creating Path of Travel with Dynamo - RVT 2020 Revit	17	3272	December 11, 2019
Path of travel problem Developers python , dynamo	6	917	July 6, 2020
Question on Path of Travel Revit dynamo	11	664	July 13, 2022
Path of travel, how to visualisize in python Developers	1	262	April 1, 2023
Pathoftravel Revit revit , geometry , dynamo	5	264	January 8, 2024

Help with PathOfTravel using RevitAPI

Related topics