Hello, I have an issue with importing feature lines from Civil3D into Dynamo. Here is the photo: [intersection] That should be an intersection with edges. This is the link to files: https://we.tl/t-fYN7WhBFei What it means that “Warning: CorridorFeatureLine.get_PolyCurve operation failed. U…

Try adjusting your geometry working range. Likely scaling it to a larger value will resolve.

[62643206_10205754221732625_7713973357691011072_o] Result is on the left :confused:

@Michael_Kirschner2 What is the suggestion for working with large coordinates? I met this also quite often, especially for civil 3d projects which uses large (UTM) coordinates (after changing Geometry Scaling).

@jrogulski - can you post the .dyn where you tried to move these to the origin as I showed in the other thread?

Here you have files: WeTransfer I have no idea how to connect Civil Flines with “Set coordinate system” blocks. [111] Even if I get it, I suppose it will loose ‘smooth’ shape. Am I right?

@jrogulski can you repost your dynamo solution? although it doesnt fit my case exactly My situation is bringing in about 50 polyline from civil3d (i placed on layer 1) that are very far from center point of the dwg and getting error: unable to create line. this is after uping my scaling, so just …

Do not bother to find a solution. It cannot be fixed without newest version of Civil with full cooperative Dynamo plug-in. About files, I can send you those if this is still in need. Jerzy Temat: [Dynamo] [Civil3D] Civil3D into Dynamo. Unable to create Line. Points are likely coincident, Nadawca…

yes can u still send. is it possible to move points from a dwg being brought in? I have 2 projects that have this problem, that need to be moved then moved back. any additional help you could provide would be appreciated

Civil3D into Dynamo. Unable to create Line. Points are likely coincident,

Civil 3D

jacob.small June 17, 2019, 11:16am 5

This may help sort things @angelohbwang.

Polycurve is not getting smooth - #9 by jacob.small

Topic		Replies	Views
Missing Featurelines with FeatureLine.ByPolyCurve Civil 3D	7	437	June 7, 2024
Civilconnection-problem of MultiPoin_2.0_DP Civil 3D dynamo	13	545	December 19, 2020
Geometry intersect problem Civil 3D	19	1680	August 19, 2021
Problem to create a feature line from polycurve Civil 3D dynamo	6	1530	November 21, 2020
Placing objects perpendicular to corridor feature line using CorridorFeatureLine.CoordinateSystemByStation Civil 3D	11	2232	April 21, 2020

Civil3D into Dynamo. Unable to create Line. Points are likely coincident,

Related topics