Hello, I have multiple points and i need to place a fabrication hanger to those points. I couldn’t find any nodes to convert point to fabrication element. Also need to change the size of the hanger too. But when i check the parameters in revit properties no option shown there. Anybody tell me how …

Hello @arukaroor and welcome Please read the forum rules if you haven’t. [image] How to get help on the Dynamo forums FAQ One of the main goals of the Dynamo community is to help others. One way to do that is by answering your questions. But to get the right answer, you’…

What do you mean by you have points to place hangers? You have coordinates? A model element that needs changed to a hanger? As mentioned MEP Fab parts are hard to work with in revit but I’m guessing you have already figured that out. Hanger size is not an available instance parameter in the revit …

Thank you Mr.c.poupin for your support. Sorry for late reply. I am not familiar with any programing language. But I have copied this example code in Dynamo and run the script as you shown in the image. In my understanding this code will place hanger at (given input) distance, and it will work with…

Thank you for your reply Mr.Evan.Pond A model element that needs changed to a hanger? : Exactly. I didn’t see a way place the hanger and change the size parameter for fabrication part in dynamo.

Here is a variant for multi conduit, nevertheless you will have to determine the points per conduits (list with sub list of points) [image] import sys import clr clr.AddReference('ProtoGeometry') from Autodesk.DesignScript.Geometry import * clr.AddReference('RevitAPI') import Autodesk from Autod…

When I to run the new script, its showing some waring in the python script. Am I doing anything wrong? Please se the attached script. Hanger-Python.dyn (16.5 KB) [Untitled-05.08.22]

I have tried the lacing already. Still it shows warning in python code. Also It would be better if we can provide hanger distance in code block as input. I mean, if the pipes total length is 10’ , the hangers should be placed at given input distance. Instead of providing the total number and steps …

[image] arukaroor: I have tried the lacing already. Still it shows warning in python code. You have an error in your graph, show the graph in this post [image] Place Fabrication hanger by points in Dynamo Revit Here is a variant for multi conduit, nevertheless you w…

Place Fabrication hanger by points in Dynamo

Revit

c.poupin August 5, 2022, 8:13pm 8

Set the lacing of the Curve.PointAtParameter node to “Cross”

Topic		Replies	Views
How to add Hangers and Supports Automatically to all to (Pipes , Ducts and Conduits)	98	24139	April 8, 2024
How to add trimple points in hanger by using dynamo Revit revit , dynamo	2	65	February 21, 2025
Hosting Fabrication Pipework elements to other pipework elements Revit revit , fabrication , dynamo	0	221	June 22, 2023
Hanger Geometry	1	368	February 21, 2019
Hanger Support for Pipe/ Duct Revit dynamo	12	3129	October 16, 2024

Place Fabrication hanger by points in Dynamo

Related topics