Does anyone have a Dynamo program to add surface to the existing Profile?

Hi @ravi.venkatappaWB2M3 , see if these help. [image] Create Surface Profiles for Multiple Alignments Civil3D For @Ernest.Villanueva . See original post here: Here’s an example of creating surface profiles for multiple alignments. This will require the Civil 3D Toolkit pa…

Dear @zachri.jensen thank you so much for your replay, and Both Dynamo files are not working for me, can you please help me with the below-mentioned item. I already have 100+ Existing Surface Profiles(in place), I just need to add the Proposed Grade surface to the same existing profile, Example, …

Hi Ravi, The second post above should help you out for design profile, you have to take a note there are nodes in toolkit - for adding a place holder of design profile or to add a design profile with a station and elevation values. if the the intention is to create a design profile exactly followi…

Dear @shahid.shaikh_C3D thank you so much for your reply, Unfortunately, this also does not match with my requirement, I am attaching an image, for more clarity i have 2 surfaces( 1. Existing & 2, Proposed, with 1st (Existing Surface) i already made profiles in civil 3d, now i want to add 2nd(…

@ravi.venkatappaWB2M3 what data you have to create a proposed surface ?

@shahid.shaikh_C3D The road department Gave me 2 surfaces, 1st is Road top links surface, 2nd is Road Bottom links surface While I am preparing the Pressure network in Civil 3D i need to maintain 1m Constant depth also need to check when Pipe cross Roads it should not pass through Road Bottom la…

@ravi.venkatappaWB2M3 ok its clear now, what you have done so far ?

@shahid.shaikh_C3D first of all i am new to Dynamo, still in the Beginner stage, i went through the above given Dynamo program and modified it as much as I aware. [Add surface ti Profile_2022-01-05_12-54-51] Add surface ti Profile.dyn (15.5 KB)

Hi as an idea You can check the height at each beginning and end of a pipe with surface Road Bottom layers If it is less than a meter, adjust the height of the pipe [Capture]

@ravi.venkatappaWB2M3 Maybe this topic will help you [image] Create Design Profiles from Selected Polylines Civil3D Hi Team This Dynamo script streamlines the design process by automating the Generation of a Design Profile within Civil 3D. Initiated with Selected Polyli…

Multiple surface add to Profile

Civil 3D

dm_salamania December 16, 2023, 6:29pm 11

@ravi.venkatappaWB2M3

Maybe this topic will help you

Topic		Replies	Views
Create Surface Profiles for Multiple Alignments Civil 3D share	2	3086	June 3, 2026
Profiles of each surface to the alignments - AddProfilebySurface Civil 3D dynamo	1	275	June 24, 2023
Create Design Profiles for Multiple Alignments Civil 3D share	13	3303	April 1, 2022
Create Profile Views for Multiple Alignments Civil 3D share	16	5173	May 8, 2025
Create Profile Civil 3D	55	6558	August 21, 2024

Multiple surface add to Profile

Related topics