hello guys I downloaded and tried the osm to mass node, I wanted to try but it does not work. I have revit 2018 and Dynamo 1.3.2.24 [forum] . The three knots do not work, I have tried this example. I would like to learn this to extract the masses in revit to show teachers at the Polytechnic of Turin.…

@Sandro You could try this. I have replaced some nodes which should work for you now. [image] [image] And here is DYN file OSM to Mass (for Sandro).dyn (24.2 KB)

@Sandro , it seems that the missing node comes from the Landform package: [image] Landform Node Index Landform is a growing set of nodes created primarily to assist with site and landscape modeling and analysis in Revit. Developed by the author of landarchbim.com. …

Hi Zhukoven, but is Landform not an old package? I use revit 2018.2 and Dynamo 1.3.2.2480. I installed the elk packages and updated spring nodes, but when I went to install landform an alert tells me that I need to uninstall spring nodes. i did not do this because the sample file is old i think th…

which node of Landform then serves according to you? Zhukon thank you

I believe this functionality of randomly generating an integer between two given numbers can be obtained by using out of the box nodes and design script. Math.Round(Math.Random(LowNumber,HighNumber)) This uses the Math.Random node to produce a double between the given low and high numbers, and the…

Kulkul knots work but the buildings have been developed with a huge height. It could depend model of the mass metric rfa family. I have set the rvt file in meters. what can it be? [kulkul rvt] [kulkul]

[image] Sandro: I have set the rvt file in meters. what can it be? Sorry for a bit late response. Either check the units settings in your metric model and set “mm”, or change your input heights (8000 and 18000) to lower values.

Bingo guys I did it I solved by lowering the quota of the code block (8.00-18.00). Sorry for this because I know that you use the unit of measurement feet and inches that I know. Here in Italy some advise to set the metric mass family model in meters because Dynamo uses the unit of measure of Revit.…

Guys can you tell me if this procedure with the nodes of Timothy Logan is the best, the right one, for the import of the urban context (streets and buildings)? I’ve recently seen the Flux platform that I find interesting, but I think that if we use Flux, we make an extra step, what do you think of …

I wanted to see a higher quality of buildings in the Open Street Map, Dynamo, Revit output. instead in the Flux output, Dynamo the quality of the buildings is low. as well as making an extra step. I think this, tell me. Thanks you are great.:grinning::+1:

Mass osm

Revit

Benjamin April 18, 2019, 1:02pm 18

Hi Jbo

I also have Sean’s problem. How can I put the solids which you want to be created in to the “DirectShape.ByGeometry” node ?

Thank you

PROTOCORE DASM StackValue error

Topic		Replies	Views
Using Elk OSM to Mass in Revit 2024 Revit elk , geometry	8	129	February 13, 2025
Create a Mass Family in Dynamo and import it to revit Geometry dynamo	8	730	April 14, 2022
Is it possible to create anything in Revit using Dynamo? Packages	23	4078	August 6, 2016
Creating walls on building masses from script Revit revit , dynamo	5	137	February 2, 2024
Linking an SAT. File For Conceptual Massing from Dynamo to Revit	11	5053	December 21, 2016

Mass osm

Related topics