Hi everyone, I’m looking for a workflow using the OpenMEP package to connect imported domestic water pipes and fittings together in Revit via Dynamo, after importing pipe geometry/data from Civil 3D Pressure Network into Revit. Specifically, I need to: Connect main pipes to branch pipes (pipe-t…

Hello! Did you try with this nodes? Sending connectors or pipes? Share your sample file, so we can help you better. [image] [image]

CONNECT PIPES AT ENDS.dyn (59.3 KB) This could be a good way to start to tackle this problem.

Hi Vladimir , thanks for your suggestion — I really appreciate it. I tested the node you recommended and it works well in Revit 2025. However, it only processes individual fittings one at a time, while my issue involves an entire system with multiple pipes and fittings that need to be connected toget…

Hi Simon_WBCIE . Could you please elaborate a bit more on the workflow idea “CONNECT PIPES AT ENDS”? I would also like to understand how it could be applied to the issue I mentioned in the topic above, Thanks

Creating Tees Dynamo Player.dyn (8.1 KB) I suggest you use a Hybrid Automated / Manual Process using Dynamo Player. To quickly select pipes and then generate pipe fittings. This example creates Tees and needs the MEPOver Package installed. Figuring how to do it all with Dynamo would be hard for lis…

Hi, Check out this topic, it might be useful to you. [image] Fittings is not connected Revit hi everyone, i cannot able to connect the pipe with fitting(one side only is not coming).i don’t know. how to figure out this. i have attached here dynamo file and …

Hi Simon_WBCIE , thanks for your response and for your suggestions on this topic!

Hi c.poupin , thanks for sharing this helpful information!

Hi Vladimir , thank you for this idea — it’s truly great. I tried running the DYN file you shared, but it seems there is an issue with the “ꟿ Geometry.GroupByDistance” node, as it returns “null” values. I have checked the Spring Nodes package version and confirmed that it matches my Revit version, bu…

How to connect multiple pipes and fittings using OpenMEP (Revit + Dynamo)

Packages

Vladimir March 5, 2026, 1:54pm 7

We can get connector’s points and group them by distance. See attached DYN.

MEP.dyn (45.9 KB)

Topic		Replies	Views
MEP Connection Revit	5	4855	May 5, 2021
Finding Pipe connections Revit revit , mep , python , dynamo , package	13	461	July 16, 2024
Can´t connect pipes with fittings Revit dynamo	8	549	February 18, 2023
Auto connect aligned fittings with pipe in between Uncategorized	17	1405	January 6, 2022
Fittings is not connected Revit dynamo	14	597	October 31, 2023

How to connect multiple pipes and fittings using OpenMEP (Revit + Dynamo)

Related topics