Fill in inside of building

[Mark.Ackerley]

Hi Comial,

Just to answer your query in reverse… The room should be bounded by the roof, but it’s a Revit issue, if you drop in a section to see the extents of the room, then go to Architecture > Room & Area > Computations > Areas and Volumes need to be selected.

Mesh Toolkit, Springs and Chinamo are the custom node packages I’ve been mainly using for this work. Dynamo Mesh Toolkit · DynamoDS/Dynamo Wiki · GitHub

I have uploaded a graph that I developed for most of our 3D printing, hopefully you can disect it and understand how these packages are used…

Automatic 3D Print Export Revit Active View

3DPrintFromRevitFamiliesActiveView.dyn (66.0 KB) A few notes: This is particular for the 3D print I wanted, so somethings are filtered out that you might want to keep It runs off the active view - often not everything in the model wants to be printed and you can then select parts of the building to print It is hollow but for most buildings the printer can print on thin air between walls (as Comial has noted room geometry could be extracted to make a solid). It goes to a lot of effor…

Good work, keeping the boss happy is the main thing, and the beauty of Dynamo is being able to create so easily these bespoke workflows for the particular requirements of a project.

Hope that’s helpful.

Mark