Greetings, I am trying to create a filled region over a selected wall at the location a selected wall by finding the top surface of the wall and pulling it over XY Plane, then translating the boundary lines to the elevation of the current View Range Cut Plane to used use them as boundaries of the f…

Yes Christian…but then i think user need pull on plane :wink: @farshidkaviani in your image you have another issue as well… [Capture]

@farshidkaviani , i would recommand using a detail-component! [grafik] placing it in the corresponing view… [grafik] here a 3D variation with generic modell… [grafik] [2023-07-26_12h40_59] KR Andreas

Hi @Draxl_Andreas , Thank you for your input, but I am not sure if I understood you completely. I used the main idea of getting the location line then I found the wall width and created 2 new lines by offsetting the curve on the sides of the location line, finally I made 2 other lines using the Star…

Hi @farshidkaviani you will need pull your curves on plane, filled region is a detail items and dont have any elevation

Hi @sovitek , Thank you for your input. I did try to pull the curves onto XY Plane but still I get an error. Filled Region-5.dyn (63.2 KB) [image] Regards, Farshid

arhh ok…not 100 sure what want to do…but could something here help… [Revit_aCy8hCSsEL] Ps seems you use some viewrange for your curves ? it should doesnt matter as the detail items is view specific …i think

I think that the end point of line 1 must be the start point of line 2, the end point of line 2 the start point of line 3, etc. The quick fix: make a polycurve of the curve loops (Polycurve.ByjoinedCurves), and then explode it.

@sovitek Thanks again for your input, but it seems your approach does not work on the walls attached to a pitched roof which is my case. [image]

Hello if your wall is only variable in height is it also variable in level? [image] [image] cordially christian.stan

try with a == -1 in the codeblock

Hello a>0 to get the upper faces for the z component of the vector? cordially christian.stan

Creating a filled region at the location of a selected wall

Revit

Draxl_Andreas July 26, 2023, 10:22am 2

@farshidkaviani ,

i would recommand using a detail-component!

placing it in the corresponing view…

here a 3D variation with generic modell…

Andreas

Topic		Replies	Views
Filled Region over walls possible? Revit revit	49	2233	January 31, 2021
How create a filled region on wall elevation in dynamo Revit revit , python , dynamo	13	353	April 13, 2024
Turn Filled Regions into Walls/Rooms Revit revit , geometry , dynamo	8	535	September 1, 2022
Filled in region problem dynamo	4	119	August 23, 2024
Filled Region from Room Boundary Packages	19	6145	February 4, 2022

Creating a filled region at the location of a selected wall

Related topics