Anyone know a quick way to run a bulk command to extend and close these type of corners? [image] Revit file: threshold.rvt (1.0 MB)

Polycurve.ByJoinedCurves with an increased miss distance.

Thanks @jacob.small I pulled together this graph so far… [image] Is there a way to lengthen that slightly shorter line so it actually closes the gap? Files in link below… [image] OpeningDesign/OD_Library An evolving content library. Contribute to OpeningDesign/OD_Library development …

Hi @Ryan_Schultz2 Try using Springs.LineLoopMerge node: [image] Wall location curve Revit If it’s all lines, you could try the LineLoopMerge node: [image] [image]

Was able to get somewhat close with these files. Anyone have any ideas on how to fully enclose? [image]

I recall that I’ve had better success bringing them in 10x the size, and then scaling down by 1/10 of the size to get around the need. Wondering if accessing the raw CAD at the increased scale and using the larger miss-distance to generate the connecting lines by proximity connections would help. Wh…

Bulk command to extend and close corners

Revit

Kulkul February 3, 2019, 7:06pm 4

Hi @Ryan_Schultz2

Try using Springs.LineLoopMerge node:

Topic		Replies	Views
Join Lines with extend line Revit revit , python , dynamo , civil3d	17	848	June 2, 2023
Join Lines Close to Each Other Geometry dynamo	0	2048	December 12, 2018
Need Help Joining Corner Lines with Gaps in Dynamo (Fillet or Extend) Revit revit , python , geometry , dynamo	28	541	April 22, 2025
Curve Trim/Extend Problem Revit dynamo	6	894	March 28, 2022
Join and trim curves Revit	19	2595	May 6, 2022

Bulk command to extend and close corners

Related topics