Hey guys, So, I’m trying to make a script that allows me to auto-tag all the families in my project following certain conditions. Basically, it finds the best distribution for the text. So far, I’ve been able to make the text rotate according to the dimensions, shrink or enlarge, and add line brea…

[image] Franck0: Now I’m trying to take it to the next level. First of all, I don’t know why when I switch to a section view in my “Views” node, Dynamo doesn’t do anything. It will only work if I close the program and run it again with that node already set, but in that case, I can’t switch back…

The first problema was related to Element Binding , apparently if Dynamo detects that it already exists a note created with that script it will not create another one even if it has different parameters, the solution was this python script: import clr import math clr.AddReference(‘RevitAPI’) fro…

Working now in the second part of the solution

Formatted and minor refactor of code (untested) import math import clr clr.AddReference("RevitNodes") import Revit clr.ImportExtensions(Revit.GeometryConversion) clr.AddReference("RevitAPI") from Autodesk.Revit.DB import * clr.AddReference("RevitServices") from RevitServices.Persistence import…

Hey, I finally picked this project back up. Following your advice, here’s what I have so far: solids that get trimmed based on the equipment depth and eventually turn into surfaces. I used circles to figure out the shortest available side for the text (which would be the text height), but I can’t wr…

Hi @Franck0 can you share an sample rvt file to do some tests

After thinking it over, I’ll use the ReferenceIntersector.FindNearest() method instead. The goal is to project points from the view onto the elements, group these points by element, and then calculate their average. [image] [image] import clr import sys import System #import net library from S…

Automatic Tagging

Revit

Franck0 October 3, 2026, 9:00pm 8

Of course and thank you, I added my dyn. file too, sorry if it’s a mess I am learning on the fly

AUTO-TAGGING-REST OF SOLIDS-PT2.dyn (202.5 KB)

DynamoTesting.rvt (5.4 MB)

Topic		Replies	Views
Duct Tagging Placement Revit	25	3601	September 30, 2018
Auto Tagging by dynamo Revit	0	810	April 14, 2020
Separate ducts and duct fittings in active view Revit	20	2542	October 30, 2017
Tagging linked file elements using Dynamo Revit revit , archi-lab , python , dynamo	53	10351	December 10, 2021
Automatically tag one element per pipe section/diameter Revit dynamo	27	2905	February 3, 2021

Automatic Tagging

Related topics