Hi, I am trying to change the value of built in parameters such as (Always vertical, Work Plane Based) of a batch of families in a directory. Following is my graph [Fix Always Vertical & Work Plane 2_2022-05-19_09-06-19] 2nd attempt: [t2] Getting Error: **Warning: Element.SetParameterByName…

Check this and should get you going in the right direction. [image] Is it possible to change the Room Calculation Point for all families in a project? Revit Had a play on my flight back to Toronto - This one will remove the need for List.UniqueItems slight_smile import c…

As mentioned via Twitter dm the issue here I think is you’re using nodes which attempt to deal with elements at project level and not documents in background. Orchid might help here, or Python if you’re savvy with it.

Don’t want to use python node.

Can you help me find the solution. It should be easy but can’t find the problem

It’s not that easy, if it was then surely my tips would be followable easily ;). Look into Orchid as a starting point, if I find time I’ll come back to this one.

Then chances are you don’t want to find a solution. Your request is fairly complicated and most likely will require some python to achieve. You may find just the right combo of nodes, but it’s probably going to be messy. As @GavinNicholls said, Orchid will be your best bet probably, but that has it…

@SeanP , I am not too good with Python in dynamo so I try to stick with nodes but anyhelp in python will also be appreciated. Tried another approach but in this case everything works and it shows the parameter is changing in dynamo but when I open the file it is still the same. [Fix Always Vertic…

After looking around the Revit API Docs it looks like these parameters are not accessible in the family editor environment via the Revit API (which document background open/close relies on). They can be read at project level but aren’t available as parameters to the family manager class. I believe …

Thank you for your response. I actually want to do this for a batch of families in a directory. I have created 2 other versions For 1 famiy - works ok For familes in project - works ok For families in directory - Stuck here!

Yes the same experience here :wink:

Set parameter of batch of families in directory

Revit

SeanP May 20, 2022, 1:12am 2

Check this and should get you going in the right direction.

Topic		Replies	Views
Edit lot of family in a revit project? Revit revit , dynamo , familyinstance , family	7	2519	April 25, 2022
Set Parameters of Family Elements from Central File Revit revit , python , dynamo	0	675	July 19, 2018
Setting the builtin parameter accessible thru the family editor? Revit classification	25	8931	December 21, 2019
Open files from a directory and change a parameter, then re-save the file Revit	15	2800	July 2, 2022
Modify specific parameter of structural Framing Family Revit python	10	204	May 24, 2024

Set parameter of batch of families in directory

Related topics