[dynamoquestion] [dynamoquestion2] [dynamoquestion3]

You want to take the block reference’s coordinate system, rotate it about it’s XY plane, then transform the identity coordinate system by the same transformation that was used to go from the original coordinate system to the new one, and use that transformation of the identity coordinate system as t…

I want to rotate existing block references in my model. I create block references from multiview blocks. Now I cannot get their geometry. Do you have any suggestions?

Have you tried to add the rotation to the BlockReference.Create instead?

Can you try this [image] Dynamic blocks to Infraworks Civil3D HI @mark.reeveTXANL CAN YOU TRY THIS [1222]

I’d look closely at Object.Transform. The exact transform you need to apply will vary by your current setup, but it’s doable.

Before doing this, I am creating block reference with rotation in proparly. After that, I want to rotate it again different plane. I am trying to do that

This node is working, thank you so much. However, I am trying to do rotation with coordinate system. Now, I am studying for that.

That node is working. But I guess I am not doing it in right way. I do not want to change the objects’ coordinates, I just want to change the normal direction to 45 degrees direction. So, objects do not bend. I do not know why I could not do it correctly. [dynamoquestion4] [dynamoquestion5] [dyn…

Thank you for this animation, it is really useful. However, for my work I told the situation probably in a wrong way. I don’t want to change rotation in (x,y) coordinates. It should be parallel to alignment. I need to transform 90 degrees to 45 degrees. Normally, its normal is perpendicular the my p…

Let’s say you are currently 00 degrees from your alignment. You want to rotate it 45 degrees clockwise. The graph currently rotates counter clockwise, so we need to subtract 45 from 360 to get 315 degrees, and use that as the rotation value.

I changed the value 315 degrees but it is still not correct. [dynamoquestion9] [dynamoquestion10]

Rotate the existing block reference objects in Civil 3D

Civil 3D

hosneyalaa February 7, 2024, 6:26pm 4

Can you try this

Topic		Replies	Views
Block references rotation Civil 3D	5	260	August 21, 2024
Get BlockReference and Rotate it Civil 3D	17	1320	December 2, 2020
Dynamo for Civil 3D. How to rotate a block on an axis XZ Civil 3D	11	2481	October 25, 2024
Block rotation based on civil alignment Civil 3D	3	315	November 27, 2024
Block Reference Create (rorationDegrees in Z and Y axis) Civil 3D dynamo	3	974	June 25, 2021

Rotate the existing block reference objects in Civil 3D

Related topics