When l have certain model lines and certainly more than 3 model lines, Dynamo (due to me likely), adds additional linework upon the topography. How can l create as many model lines as l like, that are joined and relate them to the topo, then populate successfully an adaptive component? I am practi…

Try fiddling with the working range

Hi Marcel, What is the working range in terms of this scenario?

Marcel, I found the working range and testing now.

I changed it from ‘medium’ to ‘small’ and appears to either to be taking much longer or has crashed.

Can you show the graph with all previews enabled? My first thought was that the points you have created are very close to each other. Setting the working range has some effect on the calculations done. Another way around that is to scale the lines, do the thing that needs to be done and then scal…

Hi Marcel, The error seems to occur when l have a straight and a radius, then it cannot cope working how to resolve multiple curves… [image] [image]

Have a look at this thread [image] Merging Multiple Curves into one Curve without using Polyline Packages I’m trying to create a WallByCurveAndHeight however the problem I have with my curves is that they are separated and therefore create not one continuous wall but multi…

I have tried all of the suggestions, sadly none worked. Many thanks though.

Without seeing your graph, it was the best i could do.

Model Lines to Topography Problem

Revit

Marcel_Rijsmus July 23, 2020, 12:15pm 8

Have a look at this thread

Topic		Replies	Views
Dynamo - Join multiple lines/curves (CAD.CurvesFromCADLayers) Revit	2	1263	August 20, 2021
Join Model Lines/Curves Revit revit , dynamo	8	2613	August 1, 2022
Joining model lines Uncategorized	15	173	July 8, 2025
Urban Plannig via Dynamo (BiMorph Curves from CAD Layers) Geometry revit , dynamo , bimorph	26	7076	December 7, 2018
Refining CAD lines to points to Topo Uncategorized	10	860	February 12, 2020

Model Lines to Topography Problem

Related topics