[image] Hello, I want to create this diagonal wall with dynamo, so I tried to extract edge from the wall, using SelectModelElement, which i can change the Z point of the edge, but I couldn’t find the node for extracting edge. I even downloaded GeniusLoci package, but it doesn’t work, keep saying…

Here an example [edit_wall_profile] python code (IronPython3 or PythonNet3) No solution with CPython3 (especially with Revit 2024) import clr import sys import System # clr.AddReference('ProtoGeometry') from Autodesk.DesignScript.Geometry import * import Autodesk.DesignScript.Geometry as DS #im…

[스크린샷 2024-05-05 044632] This is the loci package I used.

Hi Claire, The code of the Wall Edges References node was written using the Python 2.7 engine. So the DynamoIronPython2.7 package version 2.5 must also be installed for the custom node to run, as explained in the package description.

Thank you for your fast reply. @Alban_de_Chasteigner After I read your reply, I downloaded the DynamoIronPytnon2.7 package and tried again, but didn’t work. I’ve created wall in Revit, and want to extract edges to change the edge point so I can create diagonal wall. Is there a solution for the pa…

Hi [image] Create wall by profile Python Revit Hello, if it can help assuming it’s mm [10 juillet wallbyprofile_2023-07-10_11-34-28] I left only the creation of the wall in the transaction python script: import clr import System from System.Collections.Generic impo…

Thank you for your help! I really appreciate it. Thank you :slight_smile:

OMG it worked!!! Thank you so much :slight_smile: I am so happy. I appreciate your kindness. Thank you!

hello I used this python code to create diagonal wall, and created successfully. However, what I originally wanted to do was to extend and reduce the size of the wall freely. It also works well, but the problem is, if I extend and reduce it, the wall that I just extended also exist on the revit, …

Also, I wanted to use this python code to create tilted ceiling. So I edited the code like this, but doesn’t work. How can I solve this problem? Could you please help? Thank you. Here is the code: import clr import System from System.Collections.Generic import * clr.AddReference(‘ProtoGeometry…

Hi, if you want to modify the profile of your wall, Check that the sketch is modifiable You have a method in the Wall class CanHaveProfileSketch Method Online Documentation for Autodesk's Revit API: 2015, 2016, 2017, 2017.1, 2018 you will need its skecthI…

Hi, I did some research but I have a transaction problem that I don’t really understand for SketchEditScope Here is the data: [image] [reponse 9 mai 2024_2024-05-09_05-58-58] import sys import clr clr.AddReference('ProtoGeometry') from Autodesk.DesignScript.Geometry import * clr.AddReferenc…

How to create diagonal wall with dynamo

Dynamo Player

christian.stan May 4, 2024, 8:24pm 5

you can try this track new wall
Sincerely
christian.stan

Topic		Replies	Views
Edit profile of wall in Dynamo Geometry	5	6027	May 2, 2017
Edit Wall Profiles by not deleting the exiting walls Revit revit , python	9	121	April 21, 2026
Creating wall by profile by Python Packages	16	2451	September 28, 2020
Problems editing wall profile - Python Revit revit , python , geometry , dynamo	9	249	January 23, 2026
Revit Dynamo - Wall.Create / From Profile Question Revit python , dynamo , api	4	186	August 29, 2024

How to create diagonal wall with dynamo

Related topics