Dynamo Dictionaries to Block Attributes?

[gilberto.arechigaiba]

Amigo @jbrunkhorst buenas. what you triyng to achive is dificult and complex, but it is posible, i let you some advices:

1. Define if you want to use existing items or reproduce new instances in a new file
2. Work with 1 block definition at the time, this way you can work with only 1 set of attribute names and values at the time
3. take a look to the levels topics, will prevent you became crazy in the next days.
   I let you also some similar topics, that can help you, good luck!

[Request for Feedback] Dedicated Civil 3D chapter in the Dynamo Primer

Amigos The mos interesting and usefull of the basics (in my opinion) is to be able to instert Blocks instances, this is included in Dynamo autocad, there are 2 ways to doit, the most simple is when the Blocks exist already in the file! [Block Insert Local] Block Insert Local.dwg (473.5 KB) Block Insert Local.dyn (28.5 KB)

Get Attribute from Layer, how?

Hola amigo @Draxl_Andreas como estas?? this is a hard nut to crack my friend, there is a way with open mep for .dwg attached to a revit file i let you the link, in the default dynamo de C3D even with packages only you can get the anonymous name, with Civil3D Toolkit you can have at least the handle, better than the anonymous name!! (Version 2023) [Block query]

Dynamic Block Creation & Placement

Hola amigo @ritesh.trivedi885J6 buenas. you have a long and dificult journey, i advice you divide your script in stages: Insert the block and control the rotation to be aligned with the segment of your alignment. Control the dynamique block, (stretch action i supose) the value will be the length of the segment of your alignment. the paralels lines will be enough with an offset proces you must include all your standard that you mention to scale the lines. I let you how to control dynamique par…

this last one is a bit more complicated but it is the most similar what you triyng to achive!

Setting multiple block attribute values

Amigo @gabrielrafaeln buenas. Congratulations you almost made it, I told you that you need to use levels in your node, try to activate both parameters tag and value to work in level 2 (@2), I haven’t tried it yet, but i think will work, I still don’t know how to use levels 100 % but once you understand it you are on the other side, good luck! https://primer.dynamobim.org/06_Designing-with-Lists/6-3_lists-of-lists.html