I am having trouble with a .dyn script. I am not sure if there needs to be a sequencing to control the Oder of the queries. I wrote a script that searches a linked file for its rooms that are placed. It also searches to check that a selected category’s elements are within a room. I had assumed t…

I find it helpful to extract bounding boxes so that I can see the virtual geometry in dynamo and compare where it’s meant to be to where it is :slight_smile:

Many here likely have ideas. All of whom need your dataset and current graph. Otherwise we are talking too many variables to be of much help.

See if this helps… [image] Update Room Parameter By Linked Room Share Hi All, There have been a few posts recently about elements in linked files, I thought this might be useful for people… If you have a kitchen in your project and an apartment in a linked file, you can…

Continuing the discussion from Apply parameters from linked model rooms to elements in room : Here is the .dyn file that we are using. I am not sure if it is a model issue or a logic issue. We have built test models with multiple floors and rooms and the script works well. On some of our more adv…

It might be that there is a project north set in the revit file. You will notice in mine that I make use of the transform output from the linked instance elements node to correct for this. Hope that helps, Mark

Hi @mark.hughes3 , When you perform operations like this, your list management is extremely important. In the image you posted, you test element presence in all rooms, then you filter out unplaced rooms, and set the parameters afterwards. So if there are unplaced rooms in the architects model, you …

There is a project north oriented to a specific shared coordinate system. I will refer to your solution and get back to you.

Aah. I will look over the logic as well.

Apply parameters from linked model rooms to elements in room

Revit

Mark.Ackerley November 3, 2018, 7:24am 3

See if this helps…

Assign room numbers to equipments

Topic		Replies	Views
Apply Room Name & Number from linked model to Furniture Revit	26	7937	January 18, 2022
To push element type parameters into shared parameters for rooms Revit	14	4351	November 1, 2017
Element named by room (rooms from linked model) Lists-Logic	9	2432	January 18, 2018
Update Room Parameter By Linked Room Share	0	899	August 15, 2018
Room ToElement node Packages	22	467	January 23, 2024

Apply parameters from linked model rooms to elements in room

Related topics