Hi there! I have made my very first Dynamo script YAY! but I have encountered a small problem… So first off, my script helps me naming rooms along a line/ spline (100 points), so that Dynamo names the rooms 2, 4 6 and so on… Problem is, that the script, somhow names my corridor, even though it is …

Okay, here goes. I tried doing as you said. Using the graph on a sample project in Revit with the dyn file. The same thing happens, so apparently rooms, that go across/ around other rooms, makes a “box” around these rooms, or something. Because every point had another room to it, and guess what, it…

[image] bjkris: Dynamo%20problem|690x495 Hi Kris Congrats on your first script, beware, it might become an addiction. (Also you actually create Graphs in Dynamo, it is only textual programming like Python that are scripts) :wink: But a lot of people seems to have trouble drawing the distinct…

Hi there Jonathan thank you for the feedback. Here I thought I sounded “SOOO” smart, guess not. :grinning: Anyways, I have tried uploading a Picture of my graph below: [Graphs%20-%20brugsnumre%203] Because Im new I can only post one pic pr. post, so to be continued…

So where I see The problem is here, or a bit before. All of the 100 points, reads the correct room, but ALSO the corridor room. Which is not supposed to happen: [Graphs%20-%20brugsnumre%20-%20fejlen]

you can divide your graph as a image & upload one by one.

Lastly, here is the floorplan that I am working on, where the corridor and the rooms are shown: [Dynamo%20problem]

Good top is to zoom in so that you can see the node-names etc, and use the camera button in the top right hand corner, this will capture the entire graph with in a decent quality :slight_smile: (Also, what is the little piece of “line” that you have along the corridor)? [image]

firstly, I have just updated the picture, so that all of the note names are now shown :slight_smile: As for the magenta box, this is a firehose, that sits in the wall, and the line that goes through it, is the room boundry for the corridor.

My best bet without having a Revit file to test on is that the geometry (boundingbox) created for the corridor contains all rooms because the corridor goes trough the building as a “snake” and the boundingbox goes from outmost-point to outmost-point creating a square box incoorporating the entire “r…

Hmmm, maybe thats true, eventhough I cant really see how its possible with the room bounding box on the outside the “real rooms”. But I think i’m going to try a workaround, and see if i can filter the corridors out of the full list, so that they’re not there in the first place. Will return, when i f…

Looks like the corridor is always at the first index of the lists, so a “getitematindex” with level set to 2 and looking at index 1 would be a workaround for this specific case but not as generic as one might wan’t. :slight_smile: If you upload your .rvt and .dyn files I can give it a go? …

Tagging rooms along a line - and apparently also not on the line

Revit

Jonathan.Olesen April 27, 2018, 9:57pm 16

Hi kris, have a look at this post if you have not already seen it

Topic		Replies	Views
Renaming Rooms by Spline Revit	14	5106	December 18, 2017
Renumber rooms by spline - Not working consistently Revit revit , dynamo	16	1565	April 5, 2023
Renumber Rooms W/Spline Changes More Room Numbers Than Selected Revit revit , dynamo	5	140	September 6, 2024
Dynamo renumber by spline - Error include not intersecting rooms Revit dynamo	5	416	March 31, 2020
Which point ist in which room using dynamo Revit dynamo	4	793	December 8, 2022

Tagging rooms along a line - and apparently also not on the line

Related topics