Hi, Sorry, I just need to ask. As per the attached image I have two sets of NURBS (the top and the bottom). Is there a way to generate the top sine waves along the bottom NURBS? So the resulting sine waves will have different base elevations by which is relative to the bottom NURBS. [image] Tha…

@vbaac , Check out this topic here … :wink: [image] SinWave, damper wave, creating a loft, point-oriantation? Geometry [Sinwave_] SinWave.dyn (24.8 KB) [2022-05-25_21h55_49] Hello, I want to create a sin wave first, i would like to create sweep ( or a bend with two pr…

Hi bro @Draxl_Andreas , Thank you for your prompt reply… to be honest, I am not sure how to solve the problem using the script shown in the link you provided. But I am seriously trying find it out how it can be applied.

Hi @vbaac , Could you perhaps share your dynamo file/ this dataset?

hi Bros @Draxl_Andreas @Daan , Thank you for your help. I think I understood the solution. I just used the curve points below as a base to generate sine waves. I just switched the level to L2 for the geometry input of the Geometry.Translate Node. [image] My final task will be to figure out how …

Hi @Draxl_Andreas @Daan , Sorry, just a follow-up question. Have you encountered a geometry from dynamo, when exported to revit it does not render properly? see photo (there are several fins that did not render the wave continuously)… [image] I tried the nodes below to export the geometry to revi…

Hmm that is weird, maybe you could try exporting those solids as DirectShapes. I am however not too familiar with this subject. Perhaps @jacob.small has another/ better idea.

Can’t tell how you built this as I don’t have a Revit on this system to test it… Assuming you used the Form.ByGeometry node? If so, try a FamilyType.ByGeometry node, followed by a FamilyInstance.ByPoint node. You may have to scale stuff up from your project units to feet to overcome the units issue…

Hi bros @jacob.small @Daan , @jacob.small is correct. I think it has something to do with how I built the object from the bare units of dynamo. It is too small to be properly propagated. I recreated the base surface from an existing element in the project and a few adjustments to the parameters. Th…

Sine Wave Geometry Question

Revit

Draxl_Andreas October 10, 2022, 6:36am 2

@vbaac ,

Check out this topic here …

Topic		Replies	Views
Could You Help Me Generate a Wave Facade in Dynamo Revit revit , geometry , dynamo	4	302	January 30, 2023
Sin wave problem Revit revit , geometry , dynamo	2	447	May 14, 2022
SinWave, damper wave, creating a loft, point-oriantation? Geometry	5	534	May 28, 2022
Organic Geometry Creation Geometry revit , geometry , dynamo	13	4378	July 9, 2018
Sine wave by curve Revit dynamo	19	4687	July 11, 2020

Sine Wave Geometry Question

Related topics