Kindly give me a heads up on how to achieve this. We are using Sloped Glazing as ceiling to show the ceiling runners and ceiling panels. This works for us so it will show up in Navisworks. What i want to achieve is to replace the Curtain panel if it intersects with the FFU (Mechanical Equipment) I…

Hi @Revit_Noob i have tried your file, it very difficult get the geometry from panels many will fail..guess becaurse these warning here [Skærmbillede 2025-05-16 080958] But probably something here should do the job in this case [Skærmbillede 2025-05-16 080924] SOVI_elements_intersect.dyf (18.…

What have you tried so far? Have you searched for other topics on intersecting elements? You need to show some level of an initial attempt so we can start pointing you in the right direction.

Yes I was about to go home last time so I haven’t tried yet. [image]

Not to ask silly questions, but have you confirmed that at least one FFU does intersect a panel? And have you confirmed that all of those intersection lists are empty? If so, then you may have to use a different method.

Yes, as you can see in the image below. Encircled ones are the ones with the panels replaced with empty. Hard to see in Revit but can see clearly in navis [image] i uploaded a sample revit file here : https://www.mediafire.com/file/znnmp88h5c07nf1/ReplacePanelWithEmptyPanel.zip/file

Hi, So with your method I will need to pick the panels manually? I am trying to redo the script but I cannot find the Element.Panels node.

no the whole thing should be full automatic…that one is from clockwork, but ootb categori all elements categori [curtain panels, should do it as well, for my dyf node you could just place it in the defination folder, and you should see the node in library or just open it and copy the python node

Ok will try on my side and feedback later EDIT : I’m getting this error : [image]

could you show the full graph with all bubble pinned ?

is set parameter value by name a costum node ?

Replace Curtain Panel if Intersect

Revit

sovitek May 16, 2025, 6:13am 6

Hi @Revit_Noob i have tried your file, it very difficult get the geometry from panels many will fail..guess becaurse these warning here

But probably something here should do the job in this case

SOVI_elements_intersect.dyf (18.3 KB)

Topic		Replies	Views
Change curtain panel type based on position of windows/doors Revit geometry , dynamo	10	1565	October 6, 2021
CurtainPanel.ByElement Revit	2	765	May 30, 2018
CurtainPanel by host Revit dynamo	2	173	September 12, 2023
Closest Floor element to the curtain Panels Geometry revit , dynamo	1	236	September 30, 2022
Isolate Curtain Panel temporary Revit dynamo , api	18	194	January 28, 2025

Replace Curtain Panel if Intersect

Related topics