# Wombat package wall by profile node problem

**URL:** <https://forum.dynamobim.com/t/wombat-package-wall-by-profile-node-problem/44125>\
**Category:** Packages\
**Created:** [December 6, 2019, 1:59pm UTC](https://forum.dynamobim.com/t/wombat-package-wall-by-profile-node-problem/44125 "2019-12-06T13:59:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![cagri](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@cagri](https://forum.dynamobim.com/u/cagri)\
**Post date:** [December 6, 2019, 1:59pm UTC](https://forum.dynamobim.com/t/wombat-package-wall-by-profile-node-problem/44125/1 "2019-12-06T13:59:55Z")

</div>

hi everyone,

i’m a dynamo newbie and trying to learn what it does, what i can do. at this project i am trying to create interior wall finishes via wall surface and i used the wall.byprofile node in wombatdynamo package. in the first script layout, i used room geometry to get surfaces. but the node didn’t work on a surface.

the overview of revit file and dynamo script;

 ![20190512_WallProfileExp_Rvt](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/8/98640346ff3b2fc58f1eb9efa75592e96015854e.jpeg)  
 ![20190512_WallProfileExp_DynamoScript](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/f/ffefe85b6ff8f6a5bf974ebc47d7f7a7051edd87.jpeg)

the surface; (1st script)

 ![20190512_WallProfileExp_Rvt-1](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/c/9c52d8bf650d26632f3bbe9bdcc98661768b6e79.jpeg)

on the other hand when i chose all the wall surfaces to create wall finishes, the script worked. (2nd script)

 ![20190512_WallProfileExp_Rvt-2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/0/c04f1a1f980704114976ab75a2a19131f8f0ff97.jpeg)

i don’t understand what’s the difference between them? these surfaces look like same to me. is there anyone who can explain what’s the problem here?

also i wonder if there is any node that let me edit an existing wall’s profile? if it is, that way i can use a workaround for this problem. please be consider that i don’t know any programming language.

the files;  
[20190512\_WallProfileExp.rvt](https://forum.dynamobim.com/uploads/short-url/wkWta0SxP1VIg59PfDfiyFrnfGq.rvt) (1.5 MB) (2020)  
[20190512\_WallProfileExp.dyn](https://forum.dynamobim.com/uploads/short-url/sKZk6CFxNlevmzxZQpVvi0otNJe.dyn) (56.1 KB)

---

<div class="post-metadata">

**Author:** ![10dbim3](https://avatars.discourse-cdn.com/v4/letter/1/96bed5/32.png) [@10dbim3](https://forum.dynamobim.com/u/10dbim3)\
**Post date:** [March 24, 2023, 8:05am UTC](https://forum.dynamobim.com/t/wombat-package-wall-by-profile-node-problem/44125/2 "2023-03-24T08:05:50Z")

</div>

Trying to figure out the same. could you please tell me if you were able to solve this? thanks
