# Wall Start and End point

**URL:** <https://forum.dynamobim.com/t/wall-start-and-end-point/918>\
**Category:** Packages\
**Created:** [January 14, 2015, 6:41am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918 "2015-01-14T06:41:19Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\
**Post date:** [January 14, 2015, 6:41am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/1 "2015-01-14T06:41:19Z")

</div>

Morning everyone,

im trying to find the coordinates of the start and the end of a wall to then create a line based on it. Of course i can easily list all the walls in my project but i could not find a way to track the start/end coordinates.

Any help is much appreciated… again

---

<div class="post-metadata">

**Author:** ![Julien\_Benoit1](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/julien_benoit1/32/29558_2.png) [@Julien\_Benoit1](https://forum.dynamobim.com/u/Julien_Benoit1)\
**Post date:** [January 14, 2015, 6:59am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/2 "2015-01-14T06:59:01Z")

</div>

you need to get wall’s curve then query start and end point.

---

<div class="post-metadata">

**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\
**Post date:** [January 14, 2015, 8:08am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/3 "2015-01-14T08:08:17Z")

</div>

Im only finding Create curve, no Query. Am i missing something? … i know as usual yes 🙂

---

<div class="post-metadata">

**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\
**Post date:** [January 14, 2015, 8:15am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/4 "2015-01-14T08:15:31Z")

</div>

![WallCurve_A](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/d/df4a16961d108ce0183eda27ead1fa375d0e933e.jpg)

&nbsp;

&nbsp;

&nbsp;

&nbsp;

&nbsp;

&nbsp;

Ok, found Curve.StartPoint and Curve.EndPoint.  
I can’t pass the wall directly to them obviously, still looking to get the wall curve element… and the search goes on 🙂

&nbsp;

Thanks for the help

---

<div class="post-metadata">

**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\
**Post date:** [January 14, 2015, 10:01am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/5 "2015-01-14T10:01:53Z")

</div>

Ok, i used the element location to get the curve. Works fine 🙂  
Now onto step 2 🙂

---

<div class="post-metadata">

**Author:** ![chacha](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/chacha/32/137852_2.png) [@chacha](https://forum.dynamobim.com/u/chacha)\
**Post date:** [May 11, 2022, 11:29am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/6 "2022-05-11T11:29:07Z")

</div>

Hi, @Daniel_Hurtubise if you have worked that out?  
I’m facing the same issue as you. I want to find the start/end points of walls in the Revit model to provide data for 4D printing .

---

<div class="post-metadata">

**Author:** ![Elie.Trad](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/elie.trad/32/110373_2.png) [@Elie.Trad](https://forum.dynamobim.com/u/Elie.Trad)\
**Post date:** [May 11, 2022, 11:47am UTC](https://forum.dynamobim.com/t/wall-start-and-end-point/918/7 "2022-05-11T11:47:29Z")

</div>

@chacha you can use `Curve.StartPoint` and `Curve.EndPoint`