# Wall Opening Family doesn´t make a hole

**URL:** <https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288>\
**Category:** Revit\
**Created:** [March 29, 2021, 6:58pm UTC](https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288 "2021-03-29T18:58:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![gerhard.p](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gerhard.p/32/147675_2.png) [@gerhard.p](https://forum.dynamobim.com/u/gerhard.p)\
**Post date:** [March 29, 2021, 6:58pm UTC](https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288/1 "2021-03-29T18:58:02Z")

</div>

Good evening Dynamo Community!

I am placing wall opening families by ducts from a linked file.  
They are placed in the right spot but they only show as rectangles in Revit.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/e/aee6c93f3a21c7c7445af808f45a9e3159bb3600.png)

If i make any manipulation in revit, for example changing size or level the hole instantly is there.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/6/86bfbb76d34bb316d5eac7ae267110e6cf84ae80.png)

I´m pretty confused because it already worked a few times, some times by running the script again. I already tried new transactions…but i really can´t get this to work. Also changing parameters like size or level with dynamo doesn´t help 😕

Would be really happy about any advice! 🙂

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/4/5444cc8d6a8acaaa9b131923d228dc5c8618db3d.png)

---

<div class="post-metadata">

**Author:** ![Mark.Ackerley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mark.ackerley/32/79310_2.png) [@Mark.Ackerley](https://forum.dynamobim.com/u/Mark.Ackerley)\
**Post date:** [March 29, 2021, 8:53pm UTC](https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288/2 "2021-03-29T20:53:09Z")

</div>

Hmm…

How about a hack? Does ‘End Transaction’ then SetParameter Offset +10 followed by SetParameter Offset -10 work?

Good luck,

Mark

---

<div class="post-metadata">

**Author:** ![gerhard.p](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gerhard.p/32/147675_2.png) [@gerhard.p](https://forum.dynamobim.com/u/gerhard.p)\
**Post date:** [March 30, 2021, 7:52am UTC](https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288/3 "2021-03-30T07:52:13Z")

</div>

Thanks for your reply Mark, i already tried that but it doesn´t work.  
I thought the problem could be the host, but it finds the wall as host…

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/d/eda30e27214fcd7497dc2870af66f316dfc5d322.png)

---

<div class="post-metadata">

**Author:** ![gerhard.p](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gerhard.p/32/147675_2.png) [@gerhard.p](https://forum.dynamobim.com/u/gerhard.p)\
**Post date:** [March 30, 2021, 8:17am UTC](https://forum.dynamobim.com/t/wall-opening-family-doesn-t-make-a-hole/62288/4 "2021-03-30T08:17:43Z")

</div>

I added a bunch of transactions and found the “solution”, so you were right mark!  
I have to set one parameter a second time to make it work. Until now i always tried to set the same value twice, but it only works if i set 2 different values.

Would be interesting why this happens…but i´m good if it works

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/4/74338bafd043d097662a4b7d421107ab867cc8c9.png)
