# "View Type" Node Problem (archilab package 2018.13.13) **URL:** \ **Category:** Revit\ **Created:** [December 1, 2018, 6:28pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172 "2018-12-01T18:28:50Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![iliaspitserov](https://avatars.discourse-cdn.com/v4/letter/i/e19b73/32.png) [@iliaspitserov](https://forum.dynamobim.com/u/iliaspitserov)\ **Post date:** [December 1, 2018, 6:28pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/1 "2018-12-01T18:28:50Z")
![Capture](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/6/266f1b38321375301edb3241d381edaae2127288.jpeg) I’m making a graph designed to create sheets by plan views. The first step is to collect the plan views (then filter them by some project parameter). That’s where I use the **View Type** node. The problem: Whenever I shut down the graph file and then re-open or re-run it, an additional View Type output port appears on the node. The connector jumps down to bottom output and the node gives an error message. So each use, I have to delete the node, recreate it, and reconnect it in order for the script to work. Unfortunately, It’s not the first time I see this happening with nodes. Am I the only one? I’m using dynamo 2.0.1 with Revit 2019.1 Thanks everyone! ---
**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\ **Post date:** [December 1, 2018, 7:42pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/2 "2018-12-01T19:42:29Z")
This happens with nodes built for 1.3.3 but used in 2.0. Check for a more current package if one is available. ---
**Author:** ![iliaspitserov](https://avatars.discourse-cdn.com/v4/letter/i/e19b73/32.png) [@iliaspitserov](https://forum.dynamobim.com/u/iliaspitserov)\ **Post date:** [December 1, 2018, 7:44pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/3 "2018-12-01T19:44:25Z")
Great, thanks a lot. I’ll check. ---
**Author:** ![iliaspitserov](https://avatars.discourse-cdn.com/v4/letter/i/e19b73/32.png) [@iliaspitserov](https://forum.dynamobim.com/u/iliaspitserov)\ **Post date:** [December 1, 2018, 9:35pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/4 "2018-12-01T21:35:56Z")
Nope. No updates for the package. In fact, it looks like Archilab stopped producing it all together. ---
**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\ **Post date:** [December 1, 2018, 9:47pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/5 "2018-12-01T21:47:03Z")
Check this link, looks like another package or newer Revit may help. > [@View Type node error](https://forum.dynamobim.com/t/view-type-node-error/27802): > > Hello, I’m having some trouble with the View Type node. It works great when I first load it. However, after I save, close and reopen my dyn file, it doesn’t work anymore. I get an error message along with additional outputs. While troubleshooting, I found that if I replace it with a fresh view type node it will work again with only one output. I’m not sure if I should update the archi-lab package to solve the problem as I’m currently running Revit versions 2016-through 2018. This issue is ult… ---
**Author:** ![iliaspitserov](https://avatars.discourse-cdn.com/v4/letter/i/e19b73/32.png) [@iliaspitserov](https://forum.dynamobim.com/u/iliaspitserov)\ **Post date:** [December 1, 2018, 10:14pm UTC](https://forum.dynamobim.com/t/view-type-node-problem-archilab-package-2018-13-13/29172/6 "2018-12-01T22:14:03Z")
Alright, problem solved. I found the new package (spelled “[archi-lab.net](http://archi-lab.net)”) and updated it. Thanks!