# UV Points in a Plan View - Publishing Coordinates

**URL:** <https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969>\
**Category:** Uncategorized\
**Created:** [January 26, 2020, 9:44pm UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969 "2020-01-26T21:44:39Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![m.owens](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@m.owens](https://forum.dynamobim.com/u/m.owens)\
**Post date:** [January 26, 2020, 9:44pm UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/1 "2020-01-26T21:44:39Z")

</div>

Hi Everyone,

I am looking for a way to automate view placement on sheets. The basic idea is that I can create a list of coordinates on a sheet and place views based on pre-determined grid sizes. The issue I am running into, is creating a divided surface, or somehow extracting the center-points of a divided surface.

I really thing a divided surface would work well, but it is cumbersome because I need to reference an element in Revit.

On top of that, I can’t seem to get the divided surface faces in Revit once I’ve created a divided surface. The existing nodes are very limiting.

Does anyone have any suggestions on how to go about this? In Grasshopper, it would take me about 3-4 Minutes. In Dynamo, it has already cost me an hour. ☹

Cheers,  
Matt

---

<div class="post-metadata">

**Author:** ![m.owens](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@m.owens](https://forum.dynamobim.com/u/m.owens)\
**Post date:** [January 26, 2020, 10:19pm UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/2 "2020-01-26T22:19:35Z")

</div>

Sorry. Figured it out.

I was able to create points at the UV-parameters of the surface.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/a/8a0475c76a0dda4456a9169a78f9d90bfdba30c8.png)

---

<div class="post-metadata">

**Author:** ![m.owens](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@m.owens](https://forum.dynamobim.com/u/m.owens)\
**Post date:** [January 26, 2020, 11:20pm UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/3 "2020-01-26T23:20:08Z")

</div>

So the solution I posed actually didn’t work. What I really wanted was the center point of each field.

This is what I ended up doing. (Very round-about way of getting a divided surfaces centroid.)

1. Create Boundary Surface
2. Get Isocurves at UV-parameters (I used number sequences, not ranges. Ranges broke and wouldn’t compute the last value of irrational numbers.)
3. Intersect UV-Curves and get order points
4. Rebuild Polycurves from ordered points, explode polycurves, create point at midpoint of subcurves, and rebuild polycurves again (this time at the mid-point of each field edge
5. Intersect Polycurves now running through the centroid of each field.
6. Re-order points so that they are reading from left to right, and top to bottom.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/2/925a13056aac64f83906145b7152a85e632173e5.png)

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [January 27, 2020, 12:52am UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/4 "2020-01-27T00:52:19Z")

</div>

Hi @m.owens

Nodes are not readable in your image. Try zooming in further and then use camera button (top-right) built into Dynamo - it screenshots the entire canvas. It will help others with similar query.

---

<div class="post-metadata">

**Author:** ![m.owens](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@m.owens](https://forum.dynamobim.com/u/m.owens)\
**Post date:** [January 27, 2020, 9:36am UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/5 "2020-01-27T09:36:40Z")

</div>

Thanks for the tip.

 ![Capture](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/c/1c7b489e7afb01582c6d43b859625b8cdc7a7d73.png)

---

<div class="post-metadata">

**Author:** ![m.owens](https://avatars.discourse-cdn.com/v4/letter/m/bbe5ce/32.png) [@m.owens](https://forum.dynamobim.com/u/m.owens)\
**Post date:** [January 27, 2020, 9:37am UTC](https://forum.dynamobim.com/t/uv-points-in-a-plan-view-publishing-coordinates/45969/6 "2020-01-27T09:37:51Z")

</div>

Nodes aren’t readable, but the contents of the nodes are…what am i doing wrong?

Using dynamo 1.3.3
