# Using Dynamo to Create Pattern on Surface

**URL:** <https://forum.dynamobim.com/t/using-dynamo-to-create-pattern-on-surface/1612>\
**Category:** Packages\
**Created:** [June 11, 2015, 3:24pm UTC](https://forum.dynamobim.com/t/using-dynamo-to-create-pattern-on-surface/1612 "2015-06-11T15:24:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hector\_Martinez-Rosa](https://avatars.discourse-cdn.com/v4/letter/h/ecc23a/32.png) [@Hector\_Martinez-Rosa](https://forum.dynamobim.com/u/Hector_Martinez-Rosa)\
**Post date:** [June 11, 2015, 3:24pm UTC](https://forum.dynamobim.com/t/using-dynamo-to-create-pattern-on-surface/1612/1 "2015-06-11T15:24:54Z")

</div>

Hi,

Does anybody know how to create a simple circular pattern onto a surface with an ‘attractor’ point? (I am potentially trying to use this as a perforated screen)

&nbsp;

Is there a script that I may be able to take a look at?

&nbsp;

Thanks in advance!

&nbsp;

P.S. Running Dynamo 7.4

---

<div class="post-metadata">

**Author:** ![Dimitar\_Venkov](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/dimitar_venkov/32/2068_2.png) [@Dimitar\_Venkov](https://forum.dynamobim.com/u/Dimitar_Venkov)\
**Post date:** [June 11, 2015, 9:09pm UTC](https://forum.dynamobim.com/t/using-dynamo-to-create-pattern-on-surface/1612/2 "2015-06-11T21:09:23Z")

</div>

Hi Hector,

I’d recommend updating to a later version, tho 0.74 should work just fine for the below example:

![2015-06-12_10-24-57](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/1/1910ceeae8424caf22c00d0a350c0a7f9ff0212c.png)

Ideally you should be able to use the “Surface.TrimWithEdgeLoops” node as well but for some reason it’s giving me the opposite of what I’d expect.
