# Using an existing script won't work

**URL:** <https://forum.dynamobim.com/t/using-an-existing-script-wont-work/42768>\
**Category:** Packages\
**Tags:** excel, dynamo, data-shapes\
**Created:** [November 5, 2019, 4:35pm UTC](https://forum.dynamobim.com/t/using-an-existing-script-wont-work/42768 "2019-11-05T16:35:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mkfte](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mkfte](https://forum.dynamobim.com/u/mkfte)\
**Post date:** [November 5, 2019, 4:35pm UTC](https://forum.dynamobim.com/t/using-an-existing-script-wont-work/42768/1 "2019-11-05T16:35:38Z")

</div>

Hi everyone. I’m having trouble getting this pre-made script working even though I do have the latest packages required. It seems to be that maybe the specific node definitions are no longer included in this package perhaps? Or maybe they’ve been renamed…or maybe I just don’t know what I’m doing.

To be specific, I’m trying to use this script: [Exporting Panel Schedules to Revit](https://forum.dynamobim.com/t/exporting-panel-schedules-to-revit/11932/9) to get my panel schedules into excel. However, even though I did add the “data-shapes” package, when I load the script it still says it’s missing a few node definitions (UI.FilePath Data, UI.Listview Data, UI.MultipleInputForm++).

Any ideas? Is it just not included anymore?

---

<div class="post-metadata">

**Author:** ![Manel\_Fernandez](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/manel_fernandez/32/9123_2.png) [@Manel\_Fernandez](https://forum.dynamobim.com/u/Manel_Fernandez)\
**Post date:** [November 5, 2019, 4:53pm UTC](https://forum.dynamobim.com/t/using-an-existing-script-wont-work/42768/2 "2019-11-05T16:53:34Z")

</div>

Hi there,

Have you change the Dynamo version?

Some nodes doesn’t work in the same way in Dynamo 2.0 than older versions.

Cheers

Manel

---

<div class="post-metadata">

**Author:** ![mkfte](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mkfte](https://forum.dynamobim.com/u/mkfte)\
**Post date:** [November 5, 2019, 5:20pm UTC](https://forum.dynamobim.com/t/using-an-existing-script-wont-work/42768/3 "2019-11-05T17:20:41Z")

</div>

Didn’t think that would be the issue, but updated my Dynamo and now it works! Thanks a lot for the tip. Would’ve never guessed this as the issue, and I had just assumed Dynamo would update on its own/with Revit.

Thanks again!!