# Unclip,Move and Re-Clip Project Basepoint

**URL:** <https://forum.dynamobim.com/t/unclip-move-and-re-clip-project-basepoint/32730>\
**Category:** Revit\
**Tags:** dynamo, revit20181\
**Created:** [February 27, 2019, 8:26pm UTC](https://forum.dynamobim.com/t/unclip-move-and-re-clip-project-basepoint/32730 "2019-02-27T20:26:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pperkins](https://avatars.discourse-cdn.com/v4/letter/p/c89c15/32.png) [@pperkins](https://forum.dynamobim.com/u/pperkins)\
**Post date:** [February 27, 2019, 8:26pm UTC](https://forum.dynamobim.com/t/unclip-move-and-re-clip-project-basepoint/32730/1 "2019-02-27T20:26:51Z")

</div>

Hi everyone,

I am looking for some help with using Dynamo to Unclip project base point and reclip it to a specified grid intersection.

Thanks in advance for your help.

---

<div class="post-metadata">

**Author:** ![ravidabgar](https://avatars.discourse-cdn.com/v4/letter/r/bbce88/32.png) [@ravidabgar](https://forum.dynamobim.com/u/ravidabgar)\
**Post date:** [August 21, 2019, 9:12am UTC](https://forum.dynamobim.com/t/unclip-move-and-re-clip-project-basepoint/32730/2 "2019-08-21T09:12:18Z")

</div>

Hello Everyone,  
I am also looking for same thing, Unclip, move and re-clip the project base point, can anyone help on this, whether it is possible or not, if possible how this can be done.

@ Pperkins

Please reply if you have managed to do the same.

Thanks in advance…

---

<div class="post-metadata">

**Author:** ![luupieper](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/luupieper/32/86180_2.png) [@luupieper](https://forum.dynamobim.com/u/luupieper)\
**Post date:** [August 11, 2020, 7:40am UTC](https://forum.dynamobim.com/t/unclip-move-and-re-clip-project-basepoint/32730/3 "2020-08-11T07:40:25Z")

</div>

Hello!  
I’m looking for the same kind of solution… didn’t find any node that can clip/unclip the base point

I’ll be really glad if anyone find any solution for this one  
Thanks a lot!