# Translate Geometry

**URL:** <https://forum.dynamobim.com/t/translate-geometry/62168>\
**Category:** Revit\
**Tags:** revit, geometry, dynamo\
**Created:** [March 26, 2021, 8:07am UTC](https://forum.dynamobim.com/t/translate-geometry/62168 "2021-03-26T08:07:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![karankool7568](https://avatars.discourse-cdn.com/v4/letter/k/ac91a4/32.png) [@karankool7568](https://forum.dynamobim.com/u/karankool7568)\
**Post date:** [March 26, 2021, 8:07am UTC](https://forum.dynamobim.com/t/translate-geometry/62168/1 "2021-03-26T08:07:56Z")

</div>

Hello all,

Through center line I have created a bridge. Using the same center line I want to create lamp post.

Firstly,  
As the bridge element have crossfall and rotXY applying same for lamp post it is creating two segment at same place when going for crossfall creation.

 ![lamp](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/7/777df1008a4c9d39ca6c413d191d48cf06d6985f.png)

Secondly,  
As you can see in picture at some place Y axis distance is correct but at the end part, family are not getting created on correct place.

 ![Screenshot (13)](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/9/4967cbc205418b96da9c14c630cc23428cba8ff4.png) ![Screenshot (14)](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/b/1bac5efebd1d34f3f24dcb8b9fecfefa1096e654.png)

For both of the problem I don’t understand where is the problem. Any suggestion on the same will be very much appreciated.

[light post\_crossfall.dyn](https://forum.dynamobim.com/uploads/short-url/o3DmNVv2l3uIT3xzS4EIAY9CaJM.dyn) (326.8 KB)  
For Revit file link:

> **[lamp.rvt](https://wetransfer.com/downloads/14992349e2bfe7d9f4ce12682362e2c420210326085105/f8732b)**
>
> 1 file sent via WeTransfer, the simplest way to send your files around the world

Thanks,  
Krishan

---

<div class="post-metadata">

**Author:** ![blsalvio](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@blsalvio](https://forum.dynamobim.com/u/blsalvio)\
**Post date:** [March 26, 2021, 8:12am UTC](https://forum.dynamobim.com/t/translate-geometry/62168/2 "2021-03-26T08:12:22Z")

</div>

hi @karankool7568

it would be very helpful for us if you include your dynamo file and a sample revit file.

-biboy

---

<div class="post-metadata">

**Author:** ![karankool7568](https://avatars.discourse-cdn.com/v4/letter/k/ac91a4/32.png) [@karankool7568](https://forum.dynamobim.com/u/karankool7568)\
**Post date:** [March 26, 2021, 8:54am UTC](https://forum.dynamobim.com/t/translate-geometry/62168/3 "2021-03-26T08:54:13Z")

</div>

Hey @blsalvio,

Updated, please find the files attached.

Thanks  
Krishan