# Topologic package - "Wire.ByEdges" node not working **URL:** \ **Category:** Uncategorized\ **Created:** [December 2, 2021, 11:45am UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005 "2021-12-02T11:45:43Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![honeyjain619](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/honeyjain619/32/121215_2.png) [@honeyjain619](https://forum.dynamobim.com/u/honeyjain619)\ **Post date:** [December 2, 2021, 11:45am UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/1 "2021-12-02T11:45:43Z")
Hello Everyone, any suggestion, how to resolve this issue in Topologic package - “Wire.ByEdges” node. Some time it is working and some time it’s not. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/2/32510e84301d44f372e1edcb029d6d8a4faa1c31.png) @GavinNicholls , @amw it would be very kind if you can help me ---
**Author:** ![GavinNicholls](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gavinnicholls/32/190442_2.png) [@GavinNicholls](https://forum.dynamobim.com/u/GavinNicholls)\ **Post date:** [December 2, 2021, 12:18pm UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/2 "2021-12-02T12:18:38Z")
I’d recommend reaching out to Wassim via twitter or linkedin for this one - most topologic workflows go over my head these days… ---
**Author:** ![amw](https://avatars.discourse-cdn.com/v4/letter/a/2acd7d/32.png) [@amw](https://forum.dynamobim.com/u/amw)\ **Post date:** [December 2, 2021, 6:42pm UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/3 "2021-12-02T18:42:19Z")
Same as Gavin. ---
**Author:** ![bharat.minocha](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/bharat.minocha/32/174524_2.png) [@bharat.minocha](https://forum.dynamobim.com/u/bharat.minocha)\ **Post date:** [December 26, 2023, 8:49am UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/4 "2023-12-26T08:49:07Z")
Thanks to @jabiw3SXRW , the issue here was that some of the points are not connected so using particular set of nodes could resolve it. Solution:- Using **Cluster.byTopologies followed by Topology.SelfMerge** will work perfectly. ---
**Author:** ![jabiw3SXRW](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jabiw3sxrw/32/63397_2.png) [@jabiw3SXRW](https://forum.dynamobim.com/u/jabiw3SXRW)\ **Post date:** [December 26, 2023, 9:29am UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/5 "2023-12-26T09:29:38Z")
Sorry, I know this is an old thread, but just to explain that Wire.ByEdges is mainly meant for creating manifold wires (think a regular polygon) where the edges are connected head to tail. If your shape is more complex or has disconnected/isolated edges then it is considered to be a cluster, not a wire. So Cluster.ByTopologies followed by Topology.SelfMerge will give you the best possible representation of your shape. It may stay as a Cluster if it has disconnected shapes, or be converted to a (non-manifold or manifold) wire if all the edges connect to each other. Please note that intersecting edges will be sliced and a vertex created at their intersection. ---
**Author:** ![jabiw3SXRW](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jabiw3sxrw/32/63397_2.png) [@jabiw3SXRW](https://forum.dynamobim.com/u/jabiw3SXRW)\ **Post date:** [December 26, 2023, 9:32am UTC](https://forum.dynamobim.com/t/topologic-package-wire-byedges-node-not-working/71005/6 "2023-12-26T09:32:11Z")
And finally, if you need support with the Topologic package please visit our Discord Server (topologicpy): [Discord](https://discord.com/invite/Bb8SYZvMFR) but also make sure you tag me because I don’t follow these forums.