# Topography Cut/Fill quantities

**URL:** <https://forum.dynamobim.com/t/topography-cut-fill-quantities/7114>\
**Category:** Revit\
**Created:** [October 27, 2016, 11:51am UTC](https://forum.dynamobim.com/t/topography-cut-fill-quantities/7114 "2016-10-27T11:51:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jason\_Murray](https://avatars.discourse-cdn.com/v4/letter/j/bbce88/32.png) [@Jason\_Murray](https://forum.dynamobim.com/u/Jason_Murray)\
**Post date:** [October 27, 2016, 11:51am UTC](https://forum.dynamobim.com/t/topography-cut-fill-quantities/7114/1 "2016-10-27T11:51:09Z")

</div>

Guys ,  
I have two Cad Survey files, one before construction and one after construction .  
I need to calculate the Cut fill quantities, can i do this with dynamo ?

---

<div class="post-metadata">

**Author:** ![Andreas\_Dieckmann](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andreas_dieckmann/32/365_2.png) [@Andreas\_Dieckmann](https://forum.dynamobim.com/u/Andreas_Dieckmann)\
**Post date:** [October 27, 2016, 12:10pm UTC](https://forum.dynamobim.com/t/topography-cut-fill-quantities/7114/2 "2016-10-27T12:10:21Z")

</div>

Why don’t you use the Graded Region command in the Revit UI for this?

---

<div class="post-metadata">

**Author:** ![Jason\_Murray](https://avatars.discourse-cdn.com/v4/letter/j/bbce88/32.png) [@Jason\_Murray](https://forum.dynamobim.com/u/Jason_Murray)\
**Post date:** [October 27, 2016, 1:29pm UTC](https://forum.dynamobim.com/t/topography-cut-fill-quantities/7114/3 "2016-10-27T13:29:08Z")

</div>

Thanks Andreas,

The graded region wasn’t working for me, I think i found the problem , there was a point in the New phase that was outside the perimeter of the existing topo .

Thanks again for responding
