# Tagging by parameter **URL:** \ **Category:** Revit\ **Created:** [February 4, 2020, 2:37pm UTC](https://forum.dynamobim.com/t/tagging-by-parameter/46331 "2020-02-04T14:37:33Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![selim.celem](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/selim.celem/32/73146_2.png) [@selim.celem](https://forum.dynamobim.com/u/selim.celem)\ **Post date:** [February 4, 2020, 2:37pm UTC](https://forum.dynamobim.com/t/tagging-by-parameter/46331/1 "2020-02-04T14:37:33Z")
Hi, I am working on a project here at work and there are Dimensions parameters for each electrical fixture with a certain value. These values stand for the height of the placement of the electrical fixtures. When I try to tag these elements it’s picking up some (shared) parameter? Can someone link me or explain me real quick how I can tag the elements with a certain parameter? With or without Dynamo. ---
**Author:** ![selim.celem](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/selim.celem/32/73146_2.png) [@selim.celem](https://forum.dynamobim.com/u/selim.celem)\ **Post date:** [February 4, 2020, 2:40pm UTC](https://forum.dynamobim.com/t/tagging-by-parameter/46331/2 "2020-02-04T14:40:57Z")
![tagging by parameter](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/d/ed8ecfe321a7bc682d0019efe3526bce3362fec2.png) ---
**Author:** ![Mark.Ackerley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mark.ackerley/32/79310_2.png) [@Mark.Ackerley](https://forum.dynamobim.com/u/Mark.Ackerley)\ **Post date:** [February 4, 2020, 3:29pm UTC](https://forum.dynamobim.com/t/tagging-by-parameter/46331/3 "2020-02-04T15:29:04Z")
Hi, Sorry if i misunderstand… Your Tag reads a parameter from it’s Label… ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/1/f131fc8d7529eed24eced0d3ffdf50a28a295397.png) I suspect that either you are using the wrong Tag, or you need to edit your Tag’s label… Does that sound right? Here’s a link to a re-tagging graph i did a little while ago… it might help if you want to automate the tagging… > [@Geometry intersect issue](https://forum.dynamobim.com/t/geometry-intersect-issue/45488): > > Edit: Fixed… Linked Rooms Tags which have been unhosted in a floor plan are now recreated… Let me know if it doesn’t work for you. [Linked Room Tag Dropped.dyn](https://forum.dynamobim.com/uploads/short-url/2wZxz5Rou74DaxmtuQ6KRCqUYRE.dyn) (191.9 KB) Cheers, Mark ---
**Author:** ![selim.celem](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/selim.celem/32/73146_2.png) [@selim.celem](https://forum.dynamobim.com/u/selim.celem)\ **Post date:** [February 5, 2020, 10:20am UTC](https://forum.dynamobim.com/t/tagging-by-parameter/46331/4 "2020-02-05T10:20:18Z")
Yeah, I have been quite stupid with this one. I didn’t load in the family tag so I couldn’t tag the elements with the right parameter. All good now.