# Sweep profile along path

**URL:** <https://forum.dynamobim.com/t/sweep-profile-along-path/24171>\
**Category:** Revit\
**Created:** [July 26, 2018, 1:04pm UTC](https://forum.dynamobim.com/t/sweep-profile-along-path/24171 "2018-07-26T13:04:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![magnus](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@magnus](https://forum.dynamobim.com/u/magnus)\
**Post date:** [July 26, 2018, 1:04pm UTC](https://forum.dynamobim.com/t/sweep-profile-along-path/24171/1 "2018-07-26T13:04:47Z")

</div>

Hello!  
I want to sweep a profile along a path. Here is a picture of what i want:

 ![swept%20path](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/3/2382c1e816d6b6a1d268e403773573277799cc54.PNG)  
I’ve read some topics here about sweeping and from that i made this:  
 ![so%20far%20in%20dynamo2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/6/76345d5f28b2e1764d0cc0f1b2454316f8a3b10c.PNG)  
This is however not what i’m after. i want to do it in revit. I am looking for something similiar to the method for creating a rail along a path:  
`Autodesk.Revit.DB.Architecture.Railing.Create`  
Or even better: a node that does what i want.  
I created the sweep by component -\> model-in-place -\> sweep -\> select path  
Grateful for any tips and tricks!

---

<div class="post-metadata">

**Author:** ![\_Vijay](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/_vijay/32/91307_2.png) [@\_Vijay](https://forum.dynamobim.com/u/_Vijay)\
**Post date:** [August 28, 2020, 12:09pm UTC](https://forum.dynamobim.com/t/sweep-profile-along-path/24171/2 "2020-08-28T12:09:20Z")

</div>

Try like this

 ![Sweep 1](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/d/ed39846b9d7bc5d893726aae9dc0e1e0bacec491.png)
