# Survey Point Start Up Location

**URL:** <https://forum.dynamobim.com/t/survey-point-start-up-location/48285>\
**Category:** Uncategorized\
**Created:** [March 20, 2020, 4:25pm UTC](https://forum.dynamobim.com/t/survey-point-start-up-location/48285 "2020-03-20T16:25:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![simon\_murphy1](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/simon_murphy1/32/101536_2.png) [@simon\_murphy1](https://forum.dynamobim.com/u/simon_murphy1)\
**Post date:** [March 20, 2020, 4:25pm UTC](https://forum.dynamobim.com/t/survey-point-start-up-location/48285/1 "2020-03-20T16:25:23Z")

</div>

Hi All,

I have this script I made for placing points at survey point system locations.

It works fine if the survey point hasn’t been unpinned and then moved. Which was the case earlier.

However can someone tell me how I can get the start unpinned/moved location of the survey point?

Otherwise I will just move the survey point back temporarily in order for the script to work.

Thanks, Simon

 ![create location marker at survey point coordinates - 3 C0 POINTS_2020-03-20_04-19-57](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/f/3f8849b4ef1986316fbb6300f54245d614731cd0.png)

[create location marker at survey point coordinates - 3 C0 POINTS.dyn](https://forum.dynamobim.com/uploads/short-url/4ZFZ15DAIWvz9Pr4JBu3rbjAcq3.dyn) (57.6 KB)

---

<div class="post-metadata">

**Author:** ![m.souza](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/m.souza/32/91018_2.png) [@m.souza](https://forum.dynamobim.com/u/m.souza)\
**Post date:** [March 20, 2020, 8:37pm UTC](https://forum.dynamobim.com/t/survey-point-start-up-location/48285/2 "2020-03-20T20:37:27Z")

</div>

Hi Simon, have you tried closing dynamo and opening it again?  
Testing the node Coordinates.SurveyPoint here it does not update if I move it after running the definition. If I close dynamo an run it again it gets the new values.