# Superimpose Surfaces to create contours

**URL:** <https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922>\
**Category:** Civil 3D\
**Created:** [August 7, 2021, 4:35pm UTC](https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922 "2021-08-07T16:35:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![vincentzack](https://avatars.discourse-cdn.com/v4/letter/v/977dab/32.png) [@vincentzack](https://forum.dynamobim.com/u/vincentzack)\
**Post date:** [August 7, 2021, 4:35pm UTC](https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922/1 "2021-08-07T16:35:46Z")

</div>

Hi All,

I’m new to Civil 3D and Dynamo. I’m working on dynamo to calculate the tunnel settlement. I have the tunnel alignments, profiles, and ground surface. I have the idea of having the dynamo to create the surface (created from COGO points after the calculation) representing the settlement for one tunnel (like the dot line) but don’t know how to combine it with others. I’m looking for a method to superimpose two surfaces and get the final surface, then generate the settlement contours (like the solid line). May I know how to do it in dynamo?

![擷取](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/b/3b0d7649ae099b756345ea3a451b1928f21b6672.png)

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [August 8, 2021, 4:56pm UTC](https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922/2 "2021-08-08T16:56:09Z")

</div>

It looks like the solid line is created by adding the settlements of each dashed line at any given distance from the axis. Is that correct?

---

<div class="post-metadata">

**Author:** ![vincentzack](https://avatars.discourse-cdn.com/v4/letter/v/977dab/32.png) [@vincentzack](https://forum.dynamobim.com/u/vincentzack)\
**Post date:** [August 9, 2021, 12:51am UTC](https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922/3 "2021-08-09T00:51:07Z")

</div>

Hi mzjensen,

Yes, the solid line is created by adding the values of each dashed line at any given distance from the axis.

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [August 13, 2021, 3:30pm UTC](https://forum.dynamobim.com/t/superimpose-surfaces-to-create-contours/66922/4 "2021-08-13T15:30:01Z")

</div>

How is the settlement defined? Is there an equation that defines the settlement as a function of distance, or do you have a discrete list of values? Is the settlement constant along the entire length of the tunnel?
