# Start end point problem

**URL:** <https://forum.dynamobim.com/t/start-end-point-problem/76910>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [May 25, 2022, 8:53am UTC](https://forum.dynamobim.com/t/start-end-point-problem/76910 "2022-05-25T08:53:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![seba11](https://avatars.discourse-cdn.com/v4/letter/s/f6c823/32.png) [@seba11](https://forum.dynamobim.com/u/seba11)\
**Post date:** [May 25, 2022, 8:53am UTC](https://forum.dynamobim.com/t/start-end-point-problem/76910/1 "2022-05-25T08:53:59Z")

</div>

Is it possible to draw a lines/curves with a list of points like this:  
Line(StartPoint = … ,EndPoint = …, Direction=…)  
Line(StartPoint = … ,EndPoint = …, Direction=…)  
Line(StartPoint = … ,EndPoint = …, Direction=…)

Or is it possible to split this list in order to receive separately:  
StartPoint  
EndPoint  
StartPoint  
EndPoint  
StartPoint  
EndPoint

 ![Problem](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/a/4aec7e70f09cd63b35305d35e545af7bfcea927c.jpeg)

---

<div class="post-metadata">

**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\
**Post date:** [May 25, 2022, 8:59am UTC](https://forum.dynamobim.com/t/start-end-point-problem/76910/2 "2022-05-25T08:59:20Z")

</div>

![2022-05-25_11h07_19](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/c/bc64bab924a0f6b945291e62c329bd528f397cca.png)

@seba11 , hi

yes

KR

Andreas