# Spot coordinate and spot elevation clockwork

**URL:** <https://forum.dynamobim.com/t/spot-coordinate-and-spot-elevation-clockwork/97746>\
**Category:** Packages\
**Tags:** clockwork, dynamo\
**Created:** [February 2, 2024, 6:50am UTC](https://forum.dynamobim.com/t/spot-coordinate-and-spot-elevation-clockwork/97746 "2024-02-02T06:50:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jazzsharma200](https://avatars.discourse-cdn.com/v4/letter/j/f6c823/32.png) [@jazzsharma200](https://forum.dynamobim.com/u/jazzsharma200)\
**Post date:** [February 2, 2024, 6:50am UTC](https://forum.dynamobim.com/t/spot-coordinate-and-spot-elevation-clockwork/97746/1 "2024-02-02T06:50:39Z")

</div>

Hello everyone, I am trying to use **Spot Coordinate by Points** using Clockwork, but it is not working as expected. I am not able to understand the **Bend** and **End** inputs. I have attached an image that shows how I want the spot coordinate and how I am getting it.

 ![Revit_CkN2cIuNSs](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/b/7baf352ca5daf8b08501ff9ad6134a8d5e17eed5.png)

---

<div class="post-metadata">

**Author:** ![pyXam](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/pyxam/32/163009_2.png) [@pyXam](https://forum.dynamobim.com/u/pyXam)\
**Post date:** [February 2, 2024, 8:28am UTC](https://forum.dynamobim.com/t/spot-coordinate-and-spot-elevation-clockwork/97746/2 "2024-02-02T08:28:08Z")

</div>

Hello!

This linked post has no “Solution” but i suspect that is simply due to someone not pressing the button.

> [@SpotCoordinate.ByPoint error](https://forum.dynamobim.com/t/spotcoordinate-bypoint-error/42316/4):
>
> Yes, but a vector (line/curve) from the origin. See if this post can help you. [https://thebuildingcoder.typepad.com/blog/2010/01/spot-elevation-creation-on-top-of-beam.html](https://thebuildingcoder.typepad.com/blog/2010/01/spot-elevation-creation-on-top-of-beam.html) Or this