# Splitting Curves

**URL:** <https://forum.dynamobim.com/t/splitting-curves/25191>\
**Category:** Revit\
**Created:** [August 25, 2018, 3:15am UTC](https://forum.dynamobim.com/t/splitting-curves/25191 "2018-08-25T03:15:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ashwinash112](https://avatars.discourse-cdn.com/v4/letter/a/58956e/32.png) [@ashwinash112](https://forum.dynamobim.com/u/ashwinash112)\
**Post date:** [August 25, 2018, 3:15am UTC](https://forum.dynamobim.com/t/splitting-curves/25191/1 "2018-08-25T03:15:45Z")

</div>

![CROptx](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/0/001ae8f9c7ecf4ca3dda7bbdfc52e732e2d91bcf.png)

i joined 7 curves to make a polycurve to offset it by an amount.Now I want to split the curve back into my 7 curves…Or split them at right angles junctions (Both will do)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [August 25, 2018, 3:45am UTC](https://forum.dynamobim.com/t/splitting-curves/25191/2 "2018-08-25T03:45:11Z")

</div>

Geometry.Explode should work.