# Split multiple solids with surfaces

**URL:** <https://forum.dynamobim.com/t/split-multiple-solids-with-surfaces/40845>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [September 19, 2019, 12:35pm UTC](https://forum.dynamobim.com/t/split-multiple-solids-with-surfaces/40845 "2019-09-19T12:35:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![diegosanna18](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/diegosanna18/32/61295_2.png) [@diegosanna18](https://forum.dynamobim.com/u/diegosanna18)\
**Post date:** [September 19, 2019, 12:35pm UTC](https://forum.dynamobim.com/t/split-multiple-solids-with-surfaces/40845/1 "2019-09-19T12:35:35Z")

</div>

Hello there!  
I think this is much easier than I imagine. I want to split these sixty-four rays with two surfaces, but I’m not yet so strong with lists… Is there anyone who can help me?

Thanks a lot!

 ![split_surfaces](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/d/9dd70dff084fa903d553f0325f28f2facca40c82.png) [Ponte\_accademia\_3.dyn](https://forum.dynamobim.com/uploads/short-url/yRaxPEozYDPN1Q4rXSvJx8wycSi.dyn) (66.8 KB)

---

<div class="post-metadata">

**Author:** ![Akli.baliche](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@Akli.baliche](https://forum.dynamobim.com/u/Akli.baliche)\
**Post date:** [September 19, 2019, 1:05pm UTC](https://forum.dynamobim.com/t/split-multiple-solids-with-surfaces/40845/2 "2019-09-19T13:05:38Z")

</div>

use the Geometry.Split BuyTools mod from Synthesize