# Solid.ByUnion Error

**URL:** <https://forum.dynamobim.com/t/solid-byunion-error/21949>\
**Category:** Geometry\
**Created:** [May 16, 2018, 8:00am UTC](https://forum.dynamobim.com/t/solid-byunion-error/21949 "2018-05-16T08:00:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ella](https://avatars.discourse-cdn.com/v4/letter/e/cdc98d/32.png) [@Ella](https://forum.dynamobim.com/u/Ella)\
**Post date:** [May 16, 2018, 8:00am UTC](https://forum.dynamobim.com/t/solid-byunion-error/21949/1 "2018-05-16T08:00:16Z")

</div>

![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/f/3f808870e3ef78b3276df88987e9d3657ef739c6.jpg)

I would like to combine all elements’ solids into one solid.

But when I used ‘Solid.ByUnion’ node, the error comes out (EDGECOIN PROBLEM).

I already tried to explode all element solid into surfaces and re-joined it, but the outcome was same.

Anyone who had the same problem??

---

<div class="post-metadata">

**Author:** ![Dharman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/dharman/32/20649_2.png) [@Dharman](https://forum.dynamobim.com/u/Dharman)\
**Post date:** [May 16, 2018, 8:17am UTC](https://forum.dynamobim.com/t/solid-byunion-error/21949/2 "2018-05-16T08:17:19Z")

</div>

Hi Ella,

There is unlikely an easy fix. Boolean operations on solids fail at some point in most software. Usually co-planar faces (faces in the same place), or very tiny overlaps will cause errors. Could you upload or share a link to the smallest part of your project that still causes this issue? and the Dyn file too. Have you tried just with two elements to start with?
