# Slope of  floors 

**URL:** <https://forum.dynamobim.com/t/slope-of-floors/56211>\
**Category:** Revit\
**Tags:** revit, dynamo\
**Created:** [October 15, 2020, 1:58am UTC](https://forum.dynamobim.com/t/slope-of-floors/56211 "2020-10-15T01:58:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fabiocosta81](https://avatars.discourse-cdn.com/v4/letter/f/9de0a6/32.png) [@fabiocosta81](https://forum.dynamobim.com/u/fabiocosta81)\
**Post date:** [October 15, 2020, 1:58am UTC](https://forum.dynamobim.com/t/slope-of-floors/56211/1 "2020-10-15T01:58:52Z")

</div>

I would like to know how can I create a routine in Dynamo that the slopes on floors are automatic indicated.

---

<div class="post-metadata">

**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\
**Post date:** [October 15, 2020, 4:49am UTC](https://forum.dynamobim.com/t/slope-of-floors/56211/2 "2020-10-15T04:49:53Z")

</div>

Are you wanting to place spot slopes, or actually slope the floor?

---

<div class="post-metadata">

**Author:** ![fabiocosta81](https://avatars.discourse-cdn.com/v4/letter/f/9de0a6/32.png) [@fabiocosta81](https://forum.dynamobim.com/u/fabiocosta81)\
**Post date:** [October 15, 2020, 2:45pm UTC](https://forum.dynamobim.com/t/slope-of-floors/56211/3 "2020-10-15T14:45:24Z")

</div>

I want them to be spot slopes, in the direction of the drain. Check this example the CAD.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/0/9043f222aace76ede10d4d9db18668c7d6394f23.png)