# Shift elements to multiple surfaces by dynamo

**URL:** <https://forum.dynamobim.com/t/shift-elements-to-multiple-surfaces-by-dynamo/93533>\
**Category:** Revit\
**Tags:** revit, clockwork, archi-lab, dynamo\
**Created:** [September 6, 2023, 1:59pm UTC](https://forum.dynamobim.com/t/shift-elements-to-multiple-surfaces-by-dynamo/93533 "2023-09-06T13:59:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Varrya](https://avatars.discourse-cdn.com/v4/letter/v/2acd7d/32.png) [@Varrya](https://forum.dynamobim.com/u/Varrya)\
**Post date:** [September 6, 2023, 1:59pm UTC](https://forum.dynamobim.com/t/shift-elements-to-multiple-surfaces-by-dynamo/93533/1 "2023-09-06T13:59:27Z")

</div>

I need to shift elements - families of signage - to curved surfaces which I get from linked model (roads).  
I selected top surface of road (for test I tried only one) and selected all signages, but I don’t know how to move those elements vertically to surface. Any ideas? I used packages Bimorph, Archilab, Clockwork

Thanks!

 ![Shift to surface](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/b/eb50c393ccc2139c72f563dd7b00b69129f94730.jpeg)

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [September 6, 2023, 2:01pm UTC](https://forum.dynamobim.com/t/shift-elements-to-multiple-surfaces-by-dynamo/93533/2 "2023-09-06T14:01:28Z")

</div>

Try raybounce from data-shapes

---

<div class="post-metadata">

**Author:** ![Varrya](https://avatars.discourse-cdn.com/v4/letter/v/2acd7d/32.png) [@Varrya](https://forum.dynamobim.com/u/Varrya)\
**Post date:** [September 7, 2023, 6:09am UTC](https://forum.dynamobim.com/t/shift-elements-to-multiple-surfaces-by-dynamo/93533/3 "2023-09-07T06:09:12Z")

</div>

Thank you! That’s allow me to skip selection of top surfaces from linked models, but there is one problem - it place elements slightly inside the floors instead of top surface. I suppose it can be resolve by changing internal offset in the family, but I guess it’s halfway solution.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/e/aed2bc5bcde65fd76a84a3377c1ae7a7c83de21b.png)
