# Shared Parameters into Family & Nested family

**URL:** <https://forum.dynamobim.com/t/shared-parameters-into-family-nested-family/94123>\
**Category:** Revit\
**Tags:** dynamo, orchid\
**Created:** [September 28, 2023, 2:05pm UTC](https://forum.dynamobim.com/t/shared-parameters-into-family-nested-family/94123 "2023-09-28T14:05:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan1321](https://avatars.discourse-cdn.com/v4/letter/j/f19dbf/32.png) [@Jonathan1321](https://forum.dynamobim.com/u/Jonathan1321)\
**Post date:** [September 28, 2023, 2:05pm UTC](https://forum.dynamobim.com/t/shared-parameters-into-family-nested-family/94123/1 "2023-09-28T14:05:09Z")

</div>

I have been attempting without success to create a dynamo file to perform the following function:

Requirements:

- All Parameters need to be set as Instance / Non reporting
- I cannot use type instance as I need the parameters to be editable via properties
- Hoping to achieve this to avoid reloading families as I will then export sub-family’s out with a new naming convention.

1. Specify a Directory for a wildcard search \*.RFA **Achieved**

2. Family (Main Family / Shared / Mother)  
Apply 3 shared parameters - **Achieved**

3. All Nested Family in the family (Daughter / Sub Family) **Cannot Achieve**  
(If levels can be achieved even better i.e. Look into nested family for further nested families)  
Apply 5 Shared Parameters  
This is the part I am having trouble with as I cannot figure out a way to tell dynamo to look at the family’s within the Mother file.

Associate/connect to family parameter  
(Until I can figure out how to make nested families work cannot progress)  
3No parameters in the Mother Family so that the data carries through into the Nested instances

I have followed some of the workflow here but it only really addresses a single level of the family

> [@Orchid - SharedParameter.Create fail - Autodesk.Revit.DB.ParameterType has some invalid arguments](https://forum.dynamobim.com/t/orchid-sharedparameter-create-fail-autodesk-revit-db-parametertype-has-some-invalid-arguments/92000):
>
> Hello, i’m getting the following error: Warning: SharedParameter.Create operation failed. The best overloaded method match for ‘Autodesk.Revit.DB.ExternalDefinitionCreationOptions.ExternalDefinitionCreationOptions(string, Autodesk.Revit.DB.ParameterType)’ has some invalid arguments Here’s the graph: [Family Create Parameter.dyn](https://forum.dynamobim.com/uploads/short-url/6JU0BqvYGB42ZMBduglD6h6D4O0.dyn) (24.1 KB) These are the versions I’m using: Revit Version: 2020.2.9 Dynamo Version: 2.3.2 Orchid Version: 203.6…

Does anyone have some advice or could reference a similar application that has been shown to work?

---

<div class="post-metadata">

**Author:** ![Jonathan1321](https://avatars.discourse-cdn.com/v4/letter/j/f19dbf/32.png) [@Jonathan1321](https://forum.dynamobim.com/u/Jonathan1321)\
**Post date:** [October 2, 2023, 2:11pm UTC](https://forum.dynamobim.com/t/shared-parameters-into-family-nested-family/94123/2 "2023-10-02T14:11:19Z")

</div>

bump
