# Setting Global Parameters

**URL:** <https://forum.dynamobim.com/t/setting-global-parameters/6236>\
**Category:** Revit\
**Created:** [September 16, 2016, 4:09pm UTC](https://forum.dynamobim.com/t/setting-global-parameters/6236 "2016-09-16T16:09:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![BenjaminDoty](https://avatars.discourse-cdn.com/v4/letter/b/b19c9b/32.png) [@BenjaminDoty](https://forum.dynamobim.com/u/BenjaminDoty)\
**Post date:** [September 16, 2016, 4:09pm UTC](https://forum.dynamobim.com/t/setting-global-parameters/6236/1 "2016-09-16T16:09:54Z")

</div>

I’ve searched the forum but have not seen a conclusive answer as to whether you can adjust Global Parameters via Dynamo. I have seen how to access their values but not manipulate them. [Global Parameters - #2 by Dimitar\_Venkov](https://forum.dynamobim.com/t/global-parameters/3553/2)  
Is it possible to Set the parameter?

Thanks  
Ben

---

<div class="post-metadata">

**Author:** ![john\_pierson](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/john_pierson/32/191977_2.png) [@john\_pierson](https://forum.dynamobim.com/u/john_pierson)\
**Post date:** [September 16, 2016, 7:49pm UTC](https://forum.dynamobim.com/t/setting-global-parameters/6236/2 "2016-09-16T19:49:06Z")

</div>

It seems like the API allows it.

[http://www.revitapidocs.com/2016/df012c22-6e65-8de5-1057-f15660d02288.htm](http://www.revitapidocs.com/2016/df012c22-6e65-8de5-1057-f15660d02288.htm)

---

<div class="post-metadata">

**Author:** ![Andreas\_Dieckmann](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andreas_dieckmann/32/365_2.png) [@Andreas\_Dieckmann](https://forum.dynamobim.com/u/Andreas_Dieckmann)\
**Post date:** [September 17, 2016, 1:50pm UTC](https://forum.dynamobim.com/t/setting-global-parameters/6236/3 "2016-09-17T13:50:39Z")

</div>

Unfortunately it’s not a one-liner. I only needed to get values at the time so I didn’t bother to make a node that sets values, too. Basically you have to check the data / unit type of the parameter and then check if your input value is compatible to that type. If it’s a length param (or anything else with a unit) you’ll have to perform a unit conversion as well.

---

<div class="post-metadata">

**Author:** ![john\_pierson](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/john_pierson/32/191977_2.png) [@john\_pierson](https://forum.dynamobim.com/u/john_pierson)\
**Post date:** [September 17, 2016, 3:49pm UTC](https://forum.dynamobim.com/t/setting-global-parameters/6236/4 "2016-09-17T15:49:41Z")

</div>

Sorry, I couldn’t resist. ![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/f/f5219184a14b783150d45dca807f3a596da887e5.JPG)
