# Select Multiple Edges Node?

**URL:** <https://forum.dynamobim.com/t/select-multiple-edges-node/607>\
**Category:** Packages\
**Created:** [October 3, 2014, 12:42pm UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607 "2014-10-03T12:42:35Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alexandra\_Bergin](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@Alexandra\_Bergin](https://forum.dynamobim.com/u/Alexandra_Bergin)\
**Post date:** [October 3, 2014, 12:42pm UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/1 "2014-10-03T12:42:35Z")

</div>

Hi,

The “Select Edge” Node is exactly what I need, except I would like to be able to select multiple edges instead of using a single node for each edge and then combining them in a list. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Mark\_Clarkson](https://avatars.discourse-cdn.com/v4/letter/m/858c86/32.png) [@Mark\_Clarkson](https://forum.dynamobim.com/u/Mark_Clarkson)\
**Post date:** [November 11, 2015, 4:45am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/2 "2015-11-11T04:45:23Z")

</div>

Hi Alexandra,

&nbsp;

Did you ever overcome this problem?

---

<div class="post-metadata">

**Author:** ![Dimitar\_Venkov](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/dimitar_venkov/32/2068_2.png) [@Dimitar\_Venkov](https://forum.dynamobim.com/u/Dimitar_Venkov)\
**Post date:** [November 11, 2015, 7:23am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/3 "2015-11-11T07:23:26Z")

</div>

If you download the “Dynamo for Rebar” package, you’ll find a “Select Edges” node in there:

![2015-11-11_20-52-50](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/e/e486330de68b8a08fa922e67abffe2bbfc4f2465.png)

---

<div class="post-metadata">

**Author:** ![111147](https://avatars.discourse-cdn.com/v4/letter/1/ee7513/32.png) [@111147](https://forum.dynamobim.com/u/111147)\
**Post date:** [December 30, 2015, 10:21pm UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/4 "2015-12-30T22:21:51Z")

</div>

**![QQ截图20151231114850](http://dynamobim.org/wp-content/uploads/forum-assets/lyjzone163-com/12/31/QQ%E6%88%AA%E5%9B%BE20151231114850.png)**

why i don’t find the “Select Edges” node after i install the package?

---

<div class="post-metadata">

**Author:** ![Arek\_Keshishian](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/arek_keshishian/32/13398_2.png) [@Arek\_Keshishian](https://forum.dynamobim.com/u/Arek_Keshishian)\
**Post date:** [December 31, 2015, 4:26am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/5 "2015-12-31T04:26:33Z")

</div>

This is a brilliant post. Thanks! Needed it.

---

<div class="post-metadata">

**Author:** ![Arek\_Keshishian](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/arek_keshishian/32/13398_2.png) [@Arek\_Keshishian](https://forum.dynamobim.com/u/Arek_Keshishian)\
**Post date:** [December 31, 2015, 4:29am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/6 "2015-12-31T04:29:37Z")

</div>

But I can’t find the node either. :\ (after installing the package)

---

<div class="post-metadata">

**Author:** ![Arek\_Keshishian](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/arek_keshishian/32/13398_2.png) [@Arek\_Keshishian](https://forum.dynamobim.com/u/Arek_Keshishian)\
**Post date:** [January 3, 2016, 10:05am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/7 "2016-01-03T10:05:12Z")

</div>

Hello @Dimitar,

Are you sure this is in the DynamoRebar package? no one seems to find it. Thanks!

---

<div class="post-metadata">

**Author:** ![Dimitar\_Venkov](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/dimitar_venkov/32/2068_2.png) [@Dimitar\_Venkov](https://forum.dynamobim.com/u/Dimitar_Venkov)\
**Post date:** [January 3, 2016, 11:35pm UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/8 "2016-01-03T23:35:08Z")

</div>

Hello,

I had another look. I don’t have access to the source code but it seems that the rebar package has some very specific dependencies - you need to get the right version of Revit and Dynamo for the “Select Edges” node to appear. For example for ver. 0.1.0 of the package, you need Dynamo 0.82 and Revit 2016.

Alternatively, if you want to have something that’s version agnostic, you could try the following python code - simply toggle the boolean and re-run your graph to enable the selection mode inside Revit. Be sure to press the “Finish” button inside Revit for your selection to be finalized. I’ll add this to spring nodes some time later.

 ![2016-01-04_13-03-53](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/f/fd8d0749567f1fb69cb085e2ccbb4493d4a014af.png)

&nbsp;

---

<div class="post-metadata">

**Author:** ![Arek\_Keshishian](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/arek_keshishian/32/13398_2.png) [@Arek\_Keshishian](https://forum.dynamobim.com/u/Arek_Keshishian)\
**Post date:** [January 4, 2016, 3:23am UTC](https://forum.dynamobim.com/t/select-multiple-edges-node/607/9 "2016-01-04T03:23:04Z")

</div>

Thanks for everything Dimitar, can’t wait until you do.