# Select face and element int one go

**URL:** <https://forum.dynamobim.com/t/select-face-and-element-int-one-go/96729>\
**Category:** Revit\
**Created:** [December 29, 2023, 8:39am UTC](https://forum.dynamobim.com/t/select-face-and-element-int-one-go/96729 "2023-12-29T08:39:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gruszkowski](https://avatars.discourse-cdn.com/v4/letter/g/958977/32.png) [@Gruszkowski](https://forum.dynamobim.com/u/Gruszkowski)\
**Post date:** [December 29, 2023, 8:39am UTC](https://forum.dynamobim.com/t/select-face-and-element-int-one-go/96729/1 "2023-12-29T08:39:20Z")

</div>

Hello,  
What I want is to select face of the element in Revit, and to get surface and element id.  
I noticed that built in Dynamo node “Select Face” knows what is the id of element I picked surface from, but I can’t see any way to reuse it.  
Any ideas?  
 ![Zrzut ekranu 2023-12-29 093531](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/9/5911fca151f1c3e9b631a02b7ff4b6b5cc2489f2.png)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 29, 2023, 9:42am UTC](https://forum.dynamobim.com/t/select-face-and-element-int-one-go/96729/2 "2023-12-29T09:42:36Z")

</div>

Hello @Gruszkowski try something here

 ![Skærmbillede 2023-12-29 104138](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/b/cb2f9a4277d7abed50c2919d36ff29c8651e95c9.png)

---

<div class="post-metadata">

**Author:** ![Gruszkowski](https://avatars.discourse-cdn.com/v4/letter/g/958977/32.png) [@Gruszkowski](https://forum.dynamobim.com/u/Gruszkowski)\
**Post date:** [December 29, 2023, 9:57am UTC](https://forum.dynamobim.com/t/select-face-and-element-int-one-go/96729/3 "2023-12-29T09:57:25Z")

</div>

Great, thanks!
