# Select cogo point by point number

**URL:** <https://forum.dynamobim.com/t/select-cogo-point-by-point-number/104304>\
**Category:** Civil 3D\
**Created:** [September 12, 2024, 3:13pm UTC](https://forum.dynamobim.com/t/select-cogo-point-by-point-number/104304 "2024-09-12T15:13:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yuben112](https://avatars.discourse-cdn.com/v4/letter/y/e56c9b/32.png) [@yuben112](https://forum.dynamobim.com/u/yuben112)\
**Post date:** [September 12, 2024, 3:13pm UTC](https://forum.dynamobim.com/t/select-cogo-point-by-point-number/104304/1 "2024-09-12T15:13:34Z")

</div>

Hi all,  
Newbie here and excuse my lack of proper terminology. I am trying to retrieve the northing and easting of a particular cogo point into dynamo. I was able to import all of the cogo points, but couldn’t find a node to select cogo point by point number. Any suggestions?

My ultimate goal is to create a 10 ft x 10 ft grid based on this cogo point.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/9/f9df44e53427a97262909836c006b5f2872f78a4.png)

---

<div class="post-metadata">

**Author:** ![omar.g](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/omar.g/32/146129_2.png) [@omar.g](https://forum.dynamobim.com/u/omar.g)\
**Post date:** [September 12, 2024, 5:34pm UTC](https://forum.dynamobim.com/t/select-cogo-point-by-point-number/104304/2 "2024-09-12T17:34:49Z")

</div>

Hi @yuben112,

If you’ve updated to 2025.1, there are nodes that get the Cogo Point, number, northing, and easting out of the box. You can find the same nodes in the Civil3DToolkit package if you’ve not updated yet.

---

<div class="post-metadata">

**Author:** ![yuben112](https://avatars.discourse-cdn.com/v4/letter/y/e56c9b/32.png) [@yuben112](https://forum.dynamobim.com/u/yuben112)\
**Post date:** [September 12, 2024, 6:51pm UTC](https://forum.dynamobim.com/t/select-cogo-point-by-point-number/104304/3 "2024-09-12T18:51:40Z")

</div>

thanks.