# SECTION VIEW aligned at REFERENCE PLANE

**URL:** <https://forum.dynamobim.com/t/section-view-aligned-at-reference-plane/69244>\
**Category:** Revit\
**Tags:** excel, geometry, dynamo\
**Created:** [October 13, 2021, 8:26am UTC](https://forum.dynamobim.com/t/section-view-aligned-at-reference-plane/69244 "2021-10-13T08:26:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![joelecam](https://avatars.discourse-cdn.com/v4/letter/j/b5a626/32.png) [@joelecam](https://forum.dynamobim.com/u/joelecam)\
**Post date:** [October 13, 2021, 8:26am UTC](https://forum.dynamobim.com/t/section-view-aligned-at-reference-plane/69244/1 "2021-10-13T08:26:09Z")

</div>

Hello, everyone! I would like to create through dynamo “Section View” aligned to inclined planes.  
Is that possible? I need to do it starting from dynamo because it is convenient for me to insert xyz points from excel. And then create plans that contain these points.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/9/d9594dee5a51bf6cdb563b0692560bff14db6c4a.png)

I’ve stopped here for now.

Thank you in advance!

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [October 13, 2021, 9:40am UTC](https://forum.dynamobim.com/t/section-view-aligned-at-reference-plane/69244/2 "2021-10-13T09:40:21Z")

</div>

> [@How to create Section Views in Dynamo](https://forum.dynamobim.com/t/how-to-create-section-views-in-dyanamo/2361/9):
>

---

<div class="post-metadata">

**Author:** ![joelecam](https://avatars.discourse-cdn.com/v4/letter/j/b5a626/32.png) [@joelecam](https://forum.dynamobim.com/u/joelecam)\
**Post date:** [October 13, 2021, 11:05am UTC](https://forum.dynamobim.com/t/section-view-aligned-at-reference-plane/69244/3 "2021-10-13T11:05:58Z")

</div>

![Piani diaframmi_2021-10-13_01-02-17](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/8/b87d57e91fc7e87efd5d0bc6c465908a1ad9888a.png)

Firstly, thank you so much for the help.

I tried but it doesn’t work. I can see the plans, but it doesn’t create the section views.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/6/e6d1f39cd19ce6811915293a951ce92da91ca98c.png)
