# Section of stairs **URL:** \ **Category:** Uncategorized\ **Created:** [December 27, 2022, 12:17am UTC](https://forum.dynamobim.com/t/section-of-stairs/84465 "2022-12-27T00:17:34Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ingjaidenrincon](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@ingjaidenrincon](https://forum.dynamobim.com/u/ingjaidenrincon)\ **Post date:** [December 27, 2022, 12:17am UTC](https://forum.dynamobim.com/t/section-of-stairs/84465/1 "2022-12-27T00:17:34Z")
Good morning fellows. I would like to know how I can convert this section of stairs based on lines to a solid or a surface, I appreciate the collaboration. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/0/a02998637675f32c1245a028fb031e3a8f9ec838.png) ---
**Author:** ![GavinNicholls](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gavinnicholls/32/190442_2.png) [@GavinNicholls](https://forum.dynamobim.com/u/GavinNicholls)\ **Post date:** [December 27, 2022, 2:25am UTC](https://forum.dynamobim.com/t/section-of-stairs/84465/2 "2022-12-27T02:25:48Z")
Generate lines for the side profile of the stair instead, then extrude them to the side. ---
**Author:** ![ingjaidenrincon](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@ingjaidenrincon](https://forum.dynamobim.com/u/ingjaidenrincon)\ **Post date:** [January 4, 2023, 1:49am UTC](https://forum.dynamobim.com/t/section-of-stairs/84465/3 "2023-01-04T01:49:19Z")
Thank you very much for the answer, it helped me a lot, now I would like to know how I can show the staircase area, directly in revit. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/1/4155cba61ccf937f5ff1f2d09c4a3a62760e87ef.png) ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/4/5446f5622c824b924e06e9b640675236c378bb7a.png)