# Rotation 2 point adaptive component

**URL:** <https://forum.dynamobim.com/t/rotation-2-point-adaptive-component/51596>\
**Category:** Uncategorized\
**Created:** [June 9, 2020, 8:01am UTC](https://forum.dynamobim.com/t/rotation-2-point-adaptive-component/51596 "2020-06-09T08:01:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![laurin.ernstMA6Q3](https://avatars.discourse-cdn.com/v4/letter/l/ecccb3/32.png) [@laurin.ernstMA6Q3](https://forum.dynamobim.com/u/laurin.ernstMA6Q3)\
**Post date:** [June 9, 2020, 8:01am UTC](https://forum.dynamobim.com/t/rotation-2-point-adaptive-component/51596/1 "2020-06-09T08:01:30Z")

</div>

Hi,

i place a 2 point adaptive component family via Dynamo in Revit but the i need to rotate the created family. In Revit this works easily but selected a reference plane and then the family will get placed on that reference plane. How can i do that in Dynamo? Or how can i rotate the family created by AdaptiveComponent.ByPoints2

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/2/b2042ecec8e1b906e6f37ec1299a6d6c36c4823e.png)  
The red marked family needs to be referenced to the yellow marked surface. In 3D it looks like:  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/a/ba904bb0928da506281cb3a64db366aaf96e63d1.png)

The blue group is the right node i am talking about and you can download the files here:  
[https://uibkacat-my.sharepoint.com/:f:/g/personal/laurin\_ernst\_student\_uibk\_ac\_at/EhHdRB-rlvxJjk8DOTYEh\_MBtdCFXt5r0B1Vwy\_dDbpAwQ?e=6wIUYv](https://uibkacat-my.sharepoint.com/:f:/g/personal/laurin_ernst_student_uibk_ac_at/EhHdRB-rlvxJjk8DOTYEh_MBtdCFXt5r0B1Vwy_dDbpAwQ?e=6wIUYv)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/3/338363f44d49a3ca0cdca114d3cb555e7fdeccef.png)

Thanks! 🙂